DVD PLAYER/ VIDEO CASSETTE RECORDER OWNER'S MANUAL MODEL : V782WK PAL Before connecting, operating or adjusting this product, carefully and read this instruction booklet please completely.
Safety Precautions/Important notes on controlling CAUTION Notes copyrights: by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyright material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER on It is forbidden RISK OF ELECTRIC SHOCK DO NOT OPEN this unit (OR BACK) discs.
Table of Contents Introduction SafetyPrecautions.........................2 2 Important notes on controlling this unit. . . . . . . . . TableofContents..........................3 BeforeUse..............................4-5 PlayableDiscs...........................4 Precautions.............................5 NotesonDiscs..........................5 AboutSymbols..........................5 .6 FrontPanelandDisplayWindow. . . . . . . . . . . . . RemoteControl............................
Before Use Disc-related terms Discs Playable Title The main film content (8cm/12cmdisc) or (VCD) (8cm/12cmdisc) Chapter (DVD only) Sections of a picture Audio CD (8cm/12cmdisc) addition, this unit can play audio titles, MP3, WMA or or accompanying feature content or a musical piece that are smaller than titles. DVD-R, DVD±RW, a Kodak PICTURE CD and CD-R or additional feature content, or music album.
Before Use (Continued) Storing Precautions After the unit Handling discs playing, store the disc in its case. When Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- The light, shipping the unit original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory.
Front Panel and Window Display Tape Eject PAUSE/STEP Pause playback temporarily / press Forward Go to NEXT repeatedly for ( / ) frame-by-frame playback. Fast-Forward Skip/Scan, ( ) Press and hold for two seconds for chapter/track. forward search. Winds the a fast tape forwards. PLAY Starts ( G) playback. Reverse Go to beginning of current Skip/Scan, Rewind ( ) chapter/track or to PREVIOUS chapter/track.
Remote Control DVD/VCR select button Selects operational OPEN/CLOSE EJECT Open or close the the disc mode of remote control. POWER Switch this unit ON or - OPEN/CLOSE EJECT POWER TV/VCR CLK/CNT Shows you the current time DVD DISPLAY or counter. CLK/CNT - Select an item in the Select channel programme of VCR. SETUP/ i Access or remove setup the title menu - ENTER RETURN PLAY FORWARD PROGRAM PAUSE/STEP ( ) playback temporarily / press repeatedly for frame-by-frame playback.
Rear Panel AUDIO IN (Left/Right) (VCR IN AV1) signals from an external Receive the audio AUDIO OUT Connect to source to VCR. (Left/Right) (DVD/VCR OUT) amplifier, receiver or stereo system. an COMPONENT VIDEO OUT Connect to a (Y Pb Pr) (DVD inputs. EXCLUSIVE OUT) TV with Y Pb Pr AUDIO OUT Connect to (Left/Right) (DVD EXCLUSIVE OUT) amplifier, receiver or stereo system. an AERIAL Connect the aerial using this jack.
Connections Tips Depending to Component on your TV and other equipment you wish are various ways you could connect connect, there the unit. Please refer to the manuals of your TV, Stereo or other devices as necessary to make the For better sound this unit's AUDIO OUT of your reproduction, connect jacks to the audio in jacks directly to the TV. input channel. Do not connect this unit's AUDIO OUT jack to the phono in jack (record deck) of your audio system.
Connections Connecting to (Continued) Optional Equipment Notes -- Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II /Pro Logic Connect the Left and Right AUDIO OUT jacks on this unit to the audio left and right in jacks on your amplifier, receiver or stereo system, using the audio cables.
Before Tuning Operation in a VCR part - video channel on your TV 6 Press PROG. 3 more or 4 on the front of your VCR for than 4 seconds. RF36 will appear in the display window. following picture will be displayed on the TV Notes The The output frequency of this video recorder (VCR) is set at UHF channel 36. If channel 36 is already used by another TV station, or if the picture is distorted, you can change the transmitter channel of your VCR.
Before Setting Operation the clock - VCR part To set the colour Manually The clock in your VCR controls time and date settings for your VCR. 1 Press i. 1 Press 1 or 2 to select TIME DATE. Press OK. -- :. - - -- -- -- Press i. 2 The main 3 Press 1 Press 3 4 system HHMMDDMMYY --- . system menu will appear on the TV screen. or 2 to select the SYSTEM and press OK. or 4 to select according to the COLOUR used.
Before How to Operation using - VCR part the main Tuning menu This VCR menus The can easily be programmed by using displayed on screen. menus are the controlled from the Remote Control Handset. 1 2 If the TV broadcast by pressing Press i button. menu will appear on the TV screen. Automatically is weak your VCR may signal not detect the necessary information and will not be able to store them correctly.
Before Tuning In certain Operation VCR part - in TV Stations areas of the 4 Searching Manually will stop when it locates a station. Press 2 to select MFT. country broadcast signals Press 3 or 4 to adjust. may be too weak for your VCR's automatic tuning process to find or assign TV stations correctly. You must tune in these weaker broadcast stations manually 1 PR CH MFT 09 C10 00 in order for your VCR to store them. CHANNEL/CABLE Press i.
Before Operation VCR part - the order of TV Stations Changing Deleting After tuning TV stations into your VCR you may wish to change the order in which they are stored without having to retune them. The instructions given on this page will show you how you can simply move them into your desired order. 1 Press i. The main menu will appear on the TV Press 1 or 2 to select the PR SET. Press OK. TV Stations After tuning TV stations into your VCR you may wish to delete a station.
Before General This manual Operation DVD - part Temporary Explanation the basic instructions for gives operating require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, that the indicating operation is not permitted by this unit this unit. Some DVDs is not available or The TV Some items On-screen 1 2 3 status be or 4 an highlighted. the change The number buttons numbers (e.g.
Before Initial You DVD - part Menu Settings set your can Initial 1 Operation Personal Preferences own on this unit. Select you General Settings Language a see for the language Operation Press SETUP. The setup menu appears.
Before Operation DVD - part Sound Digital Others Audio Output Each DVD disc has Set the The of audio variety output options. player's Digital Audio Output according to the a type of audio system you DRC, Vocal, PBC and Auto Play settings Press 3/4 to select the desired item and press setting of the selected item is SELECT/ENTER. The use. changed DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" between On and Off.
Before Operation DVD - part Parental Control Rating Movies DVDs may contain on scenes not suitable for Therefore, discs may contain Parental Control information that certain DVD Enter the code of DVD children. Code Country applies to the complete the disc. These scenes on disc or country/area Code (See "Country whose standards disc, referring were to the list List", page 36.).
with Operation Playing You will a only tape playback, Shuttle : back or still picture press F or G. You can reach the following playback speeds. (-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) Slow motion tape 5 During playing be able to load and eject video cassettes when your VCR is plugged into the mains. Your VCR may also playback recordings from NTSC To switch off the slow motion and tapes (on PAL TV).
Operation with Instant Timer tape Recording (ITR) Your VCR allows you to make variety of simple methods: 5 recordings using a video cassette Your VCR out. runs record up to 180 minutes using Standard Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be sound 1 quality Make VCR when using picture and LP. that you have correctly connected your described earlier in this book. Insert on your VCR.
with Operation tape recording using On Screen Display Timer 6 You may set up to seven timer record events within one month of the current date. Press the numbered buttons to enter the recording start and end times of the programme that you wish to record. Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. You may also select the the start and end times by pressing Note or 4.
Operation Playing a with DVD and Video CD Playback Setup Turn on 1 Note VCD1.1 input source con- player. system: Turn and select the DVD VCD2.0 DVD the TV and select the video nected to the DVD Audio General Features DVD and Video CD the audio on input source otherwise, all operations described the remote control. Some system Moving When 2 facing up. double-sided DVD is inserted, make the side you want to play is facing down. a Press OPEN/CLOSE to close the tray.
with DVD and Video CD Operation General Features Still Picture and VCD2.0 DVD The 1 To Frame-by-frame playback VCD1.1 will now go into PAUSE mode. advance the picture frame-by-frame PAUSE/STEP pressing The repeatedly on Track icon appears Repeat on the TV screen. repeat the disc currently playing, press REPEAT a second time. during playback. The player can Track/All/Off Repeat - repeat the track currently playing, press REPEAT.
with DVD and Video CD Operation General Features Zoom VCD2.0 DVD VCD1.1 during playback or still playback discs: Menus to acti- vate the Zoom function. If you press ZOOM repeatedly, the increases up to six times. 2 Use the 1 2 zoomed 3 4 move the through normal resume playback or DVDs may contain menus that allow you to access special features. To use the disc menu, press DISC MENU. Then, press the appropriate number button to select an option.
with Audio CD and MP3/WMA Disc Operation Playing an Audio CD and MP3 CD The DVD ings Player can play or read the notes files that have on The on the TV on screen. player About the TV go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice screen Go to step 2 menu choice appears on the TV screen. to the MP3/WMA-JPEG 1. menu. 2. 3. 4. Program Folder1 Folder2 Folder3 Folder4 Folder5 Folder6 Clear All 5.
Operation Pause with Audio and MP3/WMA Disc MP3 CD 1 Press PAUSE/STEP WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. press PLAY or To 1 press repeat to another Track MP3 CD WMA Press . or or > briefly during playback to go to the beginning of the current to return to the track. Press . twice to briefly step back to the previous In of audio case CD, directly to any track, enter the numbered buttons (0-9) during playback.
with JPEG Disc Operation Viewing JPEG disc a JPEG This DVD Player can play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. 1 Insert TV menu to another File Press . or > once advance to the next file 1 Press PAUSE/STEP appears on during viewing a picture to the previous file. to or Still Picture disc and close the tray. a The MP3/WMA-JPEG choice Moving the screen. The will during slide show.
Programmed Playback CD VCD2.0 with Audio CD Programmed Playback function enables you to store your favorite tracks from any disc in the player memory. Program Program mode to enter the on during playback or in Program Edit mode. the stop E The with Video CD Note On a setup Video CD with menu to PBC, you the use must set PBC to Off on the function. See page 18. Program contain 30 tracks. can Press PROGRAM 1 WMA Programmed Playback and MP3/WMA disc The MP3 VCD1.
Additional On Screen Operation VCR part - Video Doctor Display You may easily amount of tape display the current time or tape counter, left, day, month, year, day of week, channel, programme tape speed and operational mode of your VCR will appear on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape. (Self-Diagnosis) This feature informs you that there is a problem with your VCR. These error messages will appear on the TV screen. 1 Press i.
Additional Operation Hi-Fi Stereo Sound Your VCR will record and VCR part - System Hi-Fi stereo sound. playback This allows you to record and playback the sound in several different ways. Video cassettes recorded on your VCR will have a normal mono audio track and two VHS Hi-Fi stereo audio tracks. These stereo tracks allow you to make audio bilingual mode from a TV video disc 1 or in Hi-Fi stereo recordings broadcast, stereo audio OPERATION or system, another Hi-Fi VCR.
Additional Operation Last Condition DVD This CD player - DVD part Memory VCD1.1 memorizes the user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load a disc that has its settings memo- rized, the latest stop position is automatically recalled. Notes -- -- Settings are stored in memory for use any time.
Special Recording Copying from DVD To VCR This unit allows you to copy the contents of tape with a press of the COPY button. Recording a DVD to a from another video recorder VHS With this video recorder you an external source, such as recorder Note If the DVD you to copy is copy not be able to copy the disc. you may protected, 1 2 3 Copy a videotape the DVD to VHS Press the COPY button the into the VCR deck. B. used for will be referred to 1 as VCR A.
Troubleshooting Check the following guide for the possible cause DVD or properly. VCR do not a before problem DVD or Correction VCR button is not switched Refer to page 2. properly. No power. The power cord is disconnected. The power is on, but the DVD player does No disc is inserted. Plug the power securely. Insert signal the TV player equipment are not connected player playback. screen. Turn Digital Audio Output position.
Language Code Enter the (See appropriate 17).
Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 19).
Specification General Power requirements AC Power consumption 23W Dimensions Mass 110-240V, 50/60 Hz 430 X 85 X 293 (approx.) 4.8 (approx.) mm (w/h/d) kg Operating temperature 5˚C to 35˚C Operating humidity 5%to90% Timer 24 hours display tape RF Modulator UHF 22 68 - (41˚F to REF NC 95˚F) (Adjustable) System Laser Semiconductor Video Head Double azimuth 4 system laser, wavelength heads, helical 650 scanning.
P/NO : 3834RP0104P
