DVD PLAYER/ VIDEO CASSETTE RECORDER OWNER'S MANUAL MODEL : V8724W PAL BZ03 Before connecting, operating or adjusting this product, carefully and read this instruction booklet please completely.
Safety Precautions/Important notes on controlling CAUTION Notes by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyright material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK (OR BACK) discs. NO USER-SERVICEABLE PARTS INSIDE This REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Table of Contents Introduction SafetyPrecautions.........................2 2 Important notes on controlling this unit. . . . . . . . . TableofContents..........................3 BeforeUse..............................4-5 PlayableDiscs...........................4 Precautions.............................5 NotesonDiscs..........................5 AboutSymbols..........................5 .6 FrontPanelandDisplayWindow. . . . . . . . . . . . . RemoteControl............................
Before Use Playable Disc-related terms Discs Title The main film content (8cm/12cmdisc) or Video CD (VCD) (8cm/12cmdisc) Audio CD (8cm/12cmdisc) In addition, this unit play can a DVD±R, DVD±RW, Kodak PICTURE CD and CD-R audio titles, MP3, WMA (DVD only) DVD or or CD-RW that contains JPEG files and SVCD also. or accompanying feature content additional feature content, or music album. Each title is assigned a title reference number enabling you to locate it easily.
Before Use (Continued) Precautions Storing After the unit Handling When shipping the unit original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. The When the unit setting picture and sound of a nearby TV or radio may be distorted during playback. In this case, position the unit The away from the TV or radio, removing the disc.
Front Panel and Display Window POWER Tape Eject Switches the unit to ON or OFF. Reverse Go to Skip/Scan, Rewind ( ) beginning of current chapter/track or Press and hold for two seconds for a fast to PREVIOUS chapter/track. search. reverse Rewinds the tape. Forward Skip/Scan, Fast-Forward ( chapter/track. ) Go to NEXT Press and hold for two seconds for a fast forward search. Winds the tape forwards. STOP ( A ) Stops playback. Disc Tray Insert disc here.
Remote Control POWER Switch this unit ON or OPEN/CLOSE EJECT Open or close the the disc OFF. DVD/VCR select button operational mode of remote control. - Select input into tape. (see TV VOL +/--: or picture PAUSE/STEP ( ) playback temporarily / press repeatedly for frame-by-frame playback. PLAY (G) Starts playback. STOP(A)? Stops playback. ? Access or remove setup menu. RETURN Remove the setup menu. Displays the menu of a video CD with PBC. - ? - ? Access the On-Screen Display.
Rear Panel AERIAL Connect the aerial this using jack. AUDIO IN (Left/Right) (VCR IN AV1) signals from an external Receive the audio AUDIO OUT Connect to source to VCR. (Left/Right) (DVD/VCR OUT) amplifier, receiver or stereo system. an COMPONENT/PROGRESSIVE SCAN VIDEO OUT (DVD EXCLUSIVE Connect to a TV with Y Pb Pr AUDIO OUT Connect to Pr (Y Pb Pr) OUT) inputs. (Left/Right) (DVD EXCLUSIVE OUT) amplifier, receiver or stereo system.
Connections Tips Depending Notes your TV and other equipment you wish to connect, there are various ways you could connect the unit. Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections. For better sound reproduction, connect this unit's AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See "Connecting to optional equipment" on page 10.
Connections Connecting to (Continued) Optional Equipment Notes -- Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II /Pro Logic Connect the Left and Right AUDIO OUT jacks on this unit to the audio left and right in jacks on your amplifier, receiver or stereo system, using the audio cables.
Before Tuning Operation in a VCR part - video channel on your TV 6 is already used by another TV station, or if picture is distorted, you can change the transmitter channel of your VCR. Stages 5 will show you how to change the output frequency of your VCR. Your TV receives recorder signals 8 ~ RF channel number 7 on 2 Insert your VCR. video tape into your VCR the remote control. on which you wish to watch video's.
Before Setting Operation the clock - VCR part To set the colour system Manually The clock in your VCR controls time and date settings for your VCR. 1 Press i. 1 Press 1 or 2 to select TIME DATE. Press OK. :. - - -- -- -- 2 The main 3 Press 1 or Press 3 or 4 menu --- . will appear on the TV screen. 2 to select the SYSTEM and press OK. 4 system used. HHMNDDMMYY -- Press i.
Before How to Operation using VCR part - the main Tuning menu This VCR menus The can easily be programmed by using displayed on screen. menus are the controlled from the Remote Control Handset. 1 2 If the TV broadcast by pressing Press i button. menu will appear on the TV screen. Automatically is weak your VCR may signal not detect the necessary information and will not be able to store them correctly.
Before Tuning In certain Operation VCR part - in TV Stations areas 4 Searching Press Manually of the country broadcast will stop when it locates a station. 2 to select MFT. signals Press 3 or 4 to adjust. may be too weak for your VCR's automatic tuning process to find or assign TV stations correctly. You must tune in these weaker broadcast stations manually 1 PR CH MFT 09 C10 00 in order for your VCR to store them. CHANNEL/CABLE Press i.
Before Operation Changing - VCR part the order of TV Stations Deleting After tuning TV stations into your VCR you may wish to change the order in which they are stored without having to retune them. The instructions given on this page will show you how you can simply move them into your desired order. 1 Press i. The main menu will appear on the TV Press 1 or 2 to select the PR SET. Press OK. TV Stations After tuning TV stations into your VCR you may wish to delete a station.
Before General This manual Operation DVD - part Temporary Explanation the basic instructions for gives operating require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, that the indicating operation is not permitted by this unit is not available or On-Screen The TV general playback screen. 1 2 3 Press 3 or can be highlighted. the change The number buttons (e.g.
Before Initial You DVD - part Picture Settings set your own Personal Preferences on this unit. can Initial 1 Operation General Settings Aspect DVD 4:3 Letterbox: Select when a standard 4:3 TV is con- Operation nected. Displays theatrical images picture. above and below the Press SETUP. The setup TV menu with masking bars 4:3 Panscan: Select when a conventional TV set is appears. connected.
Before Operation DVD - part Sound Digital Others Audio Output Each DVD disc has The DRC, Vocal, PBC and Auto of audio output variety options. player's Digital Audio Output according to the Set the a type of audio system you use. DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" between On and Off. Disc Audio ment with a Disc Menu DTS decoder, MPEG decoder.
Before Operation DVD - part Parental Control Rating DVD Enter the code of DVD Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain Code Country scenes on the disc. These scenes are a country/area rated country-dependent. were are PREATION Code Set Disc Audio AE Disc Subtitle from 1 to 8, and alternatively, more suitable scenes available for selection on some discs.
with Operation Playing You will a only tape playback, Shuttle : or still picture press F or G. You can reach the following playback speeds. (-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) Slow motion tape 5 During playing back be able to load and eject video cassettes when your VCR is plugged into the mains. Your VCR may also playback recordings from NTSC To switch off the slow motion and shuttle, press the desired function. tapes (on PAL TV).
Operation with Instant Timer tape Press LP if you wish to record in Recording (ITR) Your VCR allows you to make variety of simple methods: recordings using SP will a Recording (ITR) start recording for a set period of time or until the immediately Your VCR incorporates Long Play (LP) time record up to 180 minutes using Standard Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be when quality as SP.
with Operation tape recording using On Screen Display Timer 6 You may set up to seven timer record events within one month of the current date. Press the numbered buttons to enter the recording start and end times of the programme that you wish to record. Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. You may also select the the start and end times by pressing Note or 4.
Operation Playing with DVD and Video CD DVD and Video CD a Playback Setup Turn on DVD VCD2.0 the TV and select the video nected to the DVD General Features Note VCD1.1 input source con- player. features may also be available Audio system: Turn on the audio system and select the input source connected to the DVD 1 Moving player. Press OPEN/CLOSE to open the disc Unless stated otherwise, all operations described use the remote control.
with DVD and Video CD Operation General Features Still Picture and VCD2.0 DVD Frame-by-frame playback VCD1.1 1 Press PAUSE/STEP The player Video CDs (continued) will now - Track/All/Off Repeat 1 To repeat the track currently The Repeat Track icon appears press REPEAT. playing, on the TV screen. repeat the disc currently playing, press REPEAT 2 To a second time. during playback. The go into pause mode.
with DVD and Video CD Operation General Features Zoom VCD2.0 DVD (continued) VCD1.1 Checking during playback or still playback to acti- vate the Zoom function. If you press ZOOM repeatedly, the increases up to six times. 2 Use the 1 2 zoomed 3 4 buttons to picture. 3 Press CLEAR to resume normal the the through playback or the contents of DVD Video DVDs may contain menus that allow you to access special features. To use the disc menu, press DISC MENU.
Operation with Audio CD and MP3/WMA Disc Playing an Audio CD and MP3/WMA Disc CD MP3 The DVD Notes MP3/WMA Insert 1 Recordings a files that have The player tray. About CD; Audio CD menu appears on the TV go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2 screen MP3/WMA Disc limited Press 3/4 to select the MP3/WMA then press ENTER. appears on the TV screen. to the MP3/WMA-JPEG 1. 2. 3. 4.
with Audio and MP3/WMA Disc Operation CD Pause MP3 1 Press PAUSE/STEP WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. press PLAY or To repeat 1 press CD another Track MP3 WMA Press . twice track. case briefly to step back to the previous of audio CD, to go directly to any track, enter using the numbered buttons (0-9) during playback. Repeat Track/All/Off CD MP3 WMA " appears on the at your chosen end menu screen. point.
Operation Viewing with JPEG Disc JPEG disc a JPEG Player can play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. This DVD 1 Insert disc and close the a TV to another File Press . or > once advance to the next file 1 Press PAUSE/STEP menu appears on during viewing a picture to the previous file. to or Still Picture tray. The MP3/WMA-JPEG choice Moving the screen. slide show. during go into PAUSE mode.
Programmed Playback CD VCD2.0 with Audio CD Programmed Playback VCD1.1 function enables you to store your favorite tracks from any disc in the player memory. Program Program with Video CD Note On a setup Video CD with PBC, you must set PBC to Off on the menu to use the Program function. See page 18. contain 30 tracks. can Press PROGRAM 1 WMA Programmed Playback and MP3/WMA disc The MP3 mode to enter the during playback or in Program Edit mode.
Additional On Screen Operation - VCR part Video Doctor Display You may easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode of your VCR will appear on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape. (Self-Diagnosis) This feature informs you that there is a problem with error messages will appear on the TV your VCR. These screen. 1 Press i.
Additional Operation Hi-Fi Stereo Sound Your VCR will record and - VCR part System playback Hi-Fi stereo sound. This allows you to record and playback the sound in several different ways. Video cassettes recorded on your VCR will have a normal mono audio track and two VHS Hi-Fi stereo audio tracks. These stereo tracks OPERATION allow you to make audio recordings in Hi-Fi stereo or bilingual mode from a TV broadcast, stereo audio system, video disc or another Hi-Fi VCR.
Additional Operation Last Condition DVD This CD player - DVD part Video Mode Memory VCD1.1 memorizes the If you load a user settings ering for the last disc disc that has its settings VCD2.0 VCD1.1 playback picture may be flickon straight lines. That interpolation or De-interlace is not Dot Crawl is shown Vertical perfectly matched with the disc. In this case, the picture quality may be improved by changing the memo- video mode.
Special Recording Copying from DVD To VCR This unit allows you to copy the contents of VHS tape with a press of the COPY button. Recording from a DVD to a sure setup recorder With this video recorder you an external source, such as recorder Note Be "Progressive Scan" to set protected, make recordings from from another video camcorder. to "Off" on the Note to copy is copy you may not be able to copy the disc.
Controlling You can Your TV with the control the sound level, switch of your LG TV with the input source, and power supplied remote control. Controlling can control your TV using the buttons below. other TVs with the remote control You You Remote Control Supplied can control the sound level, input source, and power switch of non-LG TVs as well. If your TV is listed in the table below, set the appropriate manufacturer code. 1.
Troubleshooting Check the following guide for the possible cause VCR do not DVD or properly. a before problem service. contacting Cause Symptom work of DVD or Correction VCR button is not switched Refer to page 2. properly. No power. The power cord is disconnected. Plug the power securely. The power is on, but the DVD player does not work. No disc is inserted. Insert No The TV is not set to receive DVD picture.
Language Code Enter the (See appropriate 17).
Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 19).
Specification General Power requirements Power consumption Dimensions Mass AC 110-240V, 50/60 Hz 19W 430 X 78.5 X 270 (approx.) 4.2 (approx.
P/NO : 3834RV0012F