Owner's Manual

Connections
(Continued)
Connecting
to
Optional Equipment
Connecting
to an
amplifier equipped
with two chan-
nel
analog
stereo or
Dolby
Pro
Logic
II /Pro
Logic
Connect the Left and
Right
AUDIO OUT
jacks
on this
unit to the audio left and
right
in
jacks
on
your amplifier,
receiver or stereo
system, using
the audio cables.
Connecting
to an
amplifier equipped
with two
channel
digital
stereo
(PCM)
or to an Audio/
Video receiver
equipped
with a multi-channel
decoder
(Dolby DigitalTM,
MPEG 2 or
DTS)
1
Connect this unit's DIGITAL AUDIO OUT
jack
(COAXIAL
or
OPTICAL)
to the
corresponding
in
jack
on
your amplifier.
Use a
digital (coaxial
or
optical)
audio cable.
2
You
will
need to activate this unit's
digital output.
(See "Digital
Audio
Output"
on
page 18).
Digital
Multi-channel sound
A
digital
multi-channel connection
provides
the best
sound
quality.
For this
you
need a multi-channel
Audio/Video receiver that
supports
one or more of the
audio formats
supported by your
unit
(MPEG
2,
Dolby
Digital
and
DTS).
Check the receiver manual and the
logos
on the front of the receiver.
Warning:
Due to the DTS
Licensing agreement,
the
digital output
will
be
in
DTS
digital
out when DTS audio stream is
selected.
Notes
--
If
the audio format of the
digital output
does not match
the
capabilities
of
your
receiver,
the receiver
will
produce
a
strong,
distorted sound or no sound at all.
--
To see the audio format of the current
DVD in
the
On-Screen
Display, press
AUDIO.
10
Y
Pb
Pr
L
R
L
R
Amplifier (Receiver)
2 channel
analog
stereo or
Dolby
Pro
Logic
II / Pro
Logic
connection
DVD exclusive out
Rear of this unit
Both DVD and
VCR out
L
R
AUDIO INPUT
DIGITAL INPUT
COAXIAL
DIGITAL INPUT
OPTICAL
Digital
multi-channel
connection
(DVD
exclusive
out
connection)