OWNER’S MANUAL NEW TYPE CYCLONE VACUUM CLEANER This information contains important instructions for the safe use and maintenance of the vacuum cleaner. Especially, please read all of the information on page 3, 4, 5 for your safety. Please keep this manual in an easily accessible place and refer to it anytime. VB-20700HRF VB-20700HTS www.lg.
Table of contents Important safety instructions........................................................................... 3~5 How to use ........................................................................................................... 6 Assembling vacuum cleaner . ..................................................................................... 6~7 Operating vacuum cleaner . ............................................................................................
IMPORTANT SAFETY INSTRUCTIONS Read and follow all instructions before using your vacuum cleaner to prevent the risk of fire, electric shock, personal injury, or damage when using the vacuum cleaner. This guide do not cover all possible conditions that may occur. Always contact your service agent or manufacturer about problems that you do not understand. This appliance complies with the following EC Directives :-2006/95/EC Low Voltage Directive -2004/108/EC EMC Directive. This is the safety alert symbol.
IMPORTANT SAFETY INSTRUCTIONS WARNING • Do not plug in if control knob is not in OFF position. Personal injury or product damage could result. • Keep children away and beware of obstructions when rewinding the cord to prevent personal injury The cord moves rapidly when rewinding. • Disconnect electrical supply before servicing or cleaning the unit or when cleaner is not in use. Failure to do so could result in electrical shock or personal injury.
IMPORTANT SAFETY INSTRUCTIONS CAUTION • Do not put any objects into openings. Failure to do so could result in product damage. • Do not use with any opening blocked: keep free of dust, lint, hair, and anything that may reduce air flow. Failure to do so could result in product damage. • Do not use vacuum cleaner without the dust tank and/ or filters in place. Failure to do so could result in product damage.
How to use Assembling vacuum cleaner Hose Handle Spring latch Telescopic pipe ➊ Carpet and floor nozzle Push the nozzle into the telescopic pipe. 6 ➋ Telescopic pipe • Push telescopic pipe firmly into hose handle. • Grasp the spring latch to expand. • Pull out the pipe to desired length.
Fitting pipe Flexible Hose Button Attachment Point ➌ Connecting the hose to the vacuum cleaner Push the fitting pipe on the flexible hose into the attachment point on the vacuum cleaner. To remove the flexible hose from the vacuum cleaner,press the button situated on the fitting pipe, then pull the fitting pipe out of the vacuum cleaner.
How to use Operating vacuum cleaner Plug Cord reel button Control knob MAX line ➊ How to operate • Pull out the power cord to the desired length and plug into the socket. • Slide the control knob of the hose handle to operate vacuum cleaner. • To turn off, slide the control knob to off position. • Press the cord reel button to rewind the power cord after use. 8 ➋ Emptying the dust tank ➌ Park mode • Always empty the dust tank when the dust tank level reaches the MAX line.
How to use Using carpet and floor nozzle / Suction Hole for device protection Carpet Pedal Floor Suction Hole for Device Protection Extension Pipe for Lenght Adjustment ➊ Carpet and floor nozzle • Two position nozzle This is equipped with a pedal which allows you to alter its position according to the type of floor to be cleaned. • Carpet or rug position ) to lower brush. press the pedal ( • Hard floor position (tiles, parquets floor) Press the pedal ( ) to lift the brush up.
How to use Using the accessory nozzles 3 3 3 3 Crevice tool Dusting brush Upholstery nozzle 4 4 3 ➌ Upholstery nozzle 4 4 5 5 4 ➍ Dusting brush Upholstery nozzle is for vacuuming upholstery, mattresses, etc. Push the button Dusting brush is for vacuuming picture frames, furniture frames, books and other irregular surfaces.
How to use Emptying dust tank For maximum performance, always empty the dust tank when the dust tank level reaches the MAX line. Tank separation lever Pull out Tank handle MAX line Dust tank cap The dust tank needs emptying when the dust tank level reaches the MAX line. • Turn off the vacuum cleaner and unplug it. • Grasp the handle of the tank and then press the tank separation lever. • Pull out the dust tank. • Empty the tank and then assemble the dust tank as below.
How to use Cleaning dust tank Tank separation lever Pull out Tank handle • Press tank separation button and pull out dust tank. • Raise dust tank cap • Dry fully in shade so that moisture is entirely removed. 12 NOTICE If suction power decreases, clean air filter and motor safety filter.
How to use Cleaning air filter and motor safety filter Dust separator Guide cover Air filter Pre-filter cover Motor safety filter • Push the vacuum cover button, open the body cover. • Hold dust separator handle and pull it upward. • Open the guide cover by pulling the guide cover lever and remove the dust. • Open prefilter cover. • Pull out the air filter. • Clean air filter and motor safety filter with running water. • Do not wash filters with hot water.
How to use How to assemble dust separator CAUTION A ssembling will be conducted in opposite order of separation. Use the vacuum after assembling the dust separator fully. Click Click • Insert the air filter. • Close the filter cover. • Close the dust separator cover. • Hold the dust separator handle and put it down to connect it clearly. • Close the vacuum cover. 14 CAUTION • If there is no dust separator or dust separator is not installed clearly, cover will not be closed.
How to use Cleaning exhaust filter Exhaust filter cover Exhaust filter Button Lever Exhaust filter cover Click • The exhaust filter is reusable. • To clean the exhaust filter, remove the exhaust filter cover on the body by pulling it out. • Separate the exhaust filter. • Dust off filter.(Do not wash filter with water.) • The exhaust filter should be cleaned at least a year. Exhaust filter cover assembling • Fit exhaust filter cover lugs to the grooves of vacuum cleaner body. • Join it the body.
What to do if your vacuum cleaner does not work Check that the vacuum cleaner is plugged in correctly and that the electrical socket is working. hat to do when suction performance decreases W • Turn off the vacuum cleaner and unplug it. • Check the telescopic pipe, flexible hose and cleaning tool for blockages or obstructions. • Check that the dust tank is not full. Empty if necessary. • Check that dust separator is not clogged with obstruction. Eliminate it.
