Model Language Page VC3116GNT English+Chinese 24 Material Date Weight 100g 2011.11.17 Part No. MFL67280605 Color(cover/body) 4/2 Size(W*H) 150 x 220(mm) Designer Liu Bin Description Owner's manual Chage Record No. 1 2 3 4 5 6 7 8 9 Change content Change picture about parking ECO No. Date Designer Confirm ACTT201113 2012.03.
VC3116GNT 1-11 12-21
2 3 4 5 6 7 8 9 10 11 270 270 2 400 VC31116GNT 220V~ 50Hz 1400W 1600W 4.3Kg 1.
3
4
௳ሣږ 5
6
ړဌפഗยሞፌ้୲ࠀٷLjසဌፊփీኟ߾ፕLjሶႴᄲൣणפརLjժൣဢۉऐԍࢺࡗ୳࡛௦ă ซḬвၸխ࠹٧ґḞឯᆷᝢ๑፥ᄣࣂፂ߶ᜈݝ 7
1 8 2
9
10
11
Product specifications 12 Attention before using the appliance 13~14 Assembling and adjusting the Cleaner 15 Parts description and assembly Accessories Using and cleaning method of all the accessory nozzles 16 How to use crevice tool, upholstery nozzle and dust brush How to use and clean corner nozzle How to separate, clean and assembly the dust tank and the motor protection filter 17 How to separate, clean and assemble exhaust filter Disassembling Cleansing Assembling If you have a problem Packing List 27
13
14
Assembling and adjusting the Cleaner Parts description and assembly Accessories Upholstery Nozzle Dusting Brush Crevice tool Adjusting the Cleaner Use it as shown in the diagram Press power switch to start the vacuum cleaner, press once again to turn off it. The flexible hose handle has a manual air flow regulator which allows you to briefly reduce the suction level.
Using and cleaning method of all the accessory nozzles Using Upholstery Nozzle & Dust Brush & Crevice Tool Use it as shown in the diagram Dust brush can be used to clean the picture frame,furniture brim, book and other irregular surface. Upholstery nozzle can be used to clean upholstery,mattresses, etc. Crevice tool can be used to clean the gap of sofa cushion or the place with cobweb and other place hard to reach.
How to separate, clean and assembly the dust tank and the motor protection filter How to separate, clean and assembly the dust tank pull slide lever Washing dust tank with cold water after emptying the dust. dry it fully in shade so that moisture is removed entirely. How to separate, clean and assembly the motor protection filter Take out the motor protection filter from the appliance along the arrow direction. Please clean it at least once month or based on the using frequency.
How to separate, clean and assemble exhaust filter Disassembling The exhaust filter should be cleaned at least once half a year. Allow exhaust filter to dry in a shaded location for a dry. Button of the exhaust filter The exhaust filter Assembling Cleansing 1 Shake off the exhaust filter. 2 Insert the exhaust filter and join it properly until you hear the click of the button. How to keep the cleaner after using Cord winding button The cord winds up when you press the button.
19
20
Crevice tool 21
http://www.lg.com/cn P/No.
