VC3316GHTY 1-12 13-23
3 4 5 6 9 8 9 10 11 12 240 270 2 400 VC3316GHTY 220V~ 50Hz 1400W 1600W 4.7Kg 1.
ፌ!ٷ ൣटሤৣ࣍ڦ ዐक़!!!ڗൣኯĂൣۈضDŽԥDžĂ ෭݀ĂᅖጱĂڹӱĂࢇ߫ׯ ፌ!ၭ ൣோૻشĂጞጱĂডԋضڦฉᆩ ࠲!Կ ཕኹဌ߾פፕ้Lj൩ॽۙবӀ౧ݣᇀُ ࿋ዃ 5
ዐक़ڗ դۙবĐዐक़ڗđLj ߵኯዖૌփཞLjဌ૰ ٷၭᄲᆶ߀ՎLjᆌ൧ փཞઠۙব੦॰ă ཫഐև ൣলࡗײዐLjၠፑ ገणפྔ֨౧Lj ᅜႜൣলă DŽڹןൣפࣨأDž ڹӱ ኒۯӱ ཫഐև ਸ਼੩ ӈ֣ 7
1 2 䲚ᇬⲦᶘ ᴎԧᶘ 9
Product specifications Attention before using the appliance Assembling and adjusting the Cleaner Parts description and assembly Accessories Using and cleaning method of all the accessory nozzles How to use crevice tool, upholstery nozzle and dust brush How to use and clean corner nozzle 13 14~15 16 17-18 How to use sani punch nozzle How to clean sani punch nozzle How to separate, clean and assembly the dust tank and the motor protection filter 19 How to separate, clean and assemble exhaust filter Disass
Parts description and assembly ፌ!ٷ Cleaning the dirtiest environment. Middle Cleaning fabrics and mattress bedding , sofa, chair, floor. Cleaning door and window curtain, table, ፌ!ၭ and light blanket. Adjusting to”关闭” when you stop operating ࠲!Կ the appliance.
Using and cleaning method of all the accessory nozzles Using Upholstery Nozzle & Dust Brush & Crevice Tool Use it as shown in the diagram Dust brush can be used to clean the picture frame,furniture brim, book and other irregular surface. Upholstery nozzle can be used to clean upholstery,mattresses, etc. Crevice tool can be used to clean the gap of sofa cushion or the place with cobweb and other place hard to reach.
Using and cleaning the Sani Punch Njeemf Set the suction power control switch to Middle between “᳔” and “᳔ᇣ” before vacuuming. Depending on the type of bedding, handing may be awkward or it may cause a lot of noise. If this is the case, adjust the suction power control switch to a lower setting. Kpjojoh!tqjsbm Turn the button 2~3 times when the dust is filled in the dustbin while cleaning.
How to separate, clean and assembly the dust tank and the motor protection filter How to separate, clean and assembly the dust tank pull Press the ‘PUSH’ button Washing dust tank with cold water after emptying the dust. dry it fully in shade so that moisture is removed entirely. How to separate, clean and assembly the motor protection filter Take out the motor protection filter from the appliance along the arrow direction. Please clean it at least once month or based on the using frequency.
How to separate, clean and assemble exhaust filter Disassembling The exhaust filter should be cleaned at least once half a year. Allow exhaust filter to dry in a shaded location for a dry. Button of the exhaust filter The exhaust filter Assembling Cleaning 1 Shake off the exhaust filter. 2 Insert the exhaust filter and join it properly until you hear the click of the button. How to keep the cleaner after using Cord winding button Tank handle The cord winds up when you press the button.
Crevice tool Sani Punch 23
http://www.lg.