Model ずぇｕｏｔがじｈ ずぇｕｏｕがじｈ ずぇｕｏｔがしｈ ずぇｕｏｕがしｈ Language ｐｎ Page Material Date Part No. Chage No. 1 2 3 4 5 6 7 8 9 ぉげかぐきしが Color(cover/body) ｐｍｐ Size(W*H) ｐｔｎｈｏｗｎぱぱ ｐｎｎｓｌｎｔｌｐｕ Designer そべ ｑｖｐｖおきｑｖｑｑか Description こほひどぶｅぷ けづひべづば Weight ｏｎｎに しびひに Record Change content ECO No.
VC716HT* VC717HT* VC716HS* VC717HS*
Table of contents Information for your How to use the How to ........................................................................................... head and the dust chamber Operation Adjusting cleaner cleaning Emptying Accessory the power level plug in and use ................................................................................... ...................................................................................... .....................................................
Information for your safety Please read all the following information, which contains important instructions for the safety, the use and the maintenance of the appliance. This appliance complies with the following EC Directives: -73/23/EEC, 93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive. Never allow children to use the appliance unsupervised. Do not use the appliance If the mains lead is damaged or faulty.
How to Fit the use Assembling large cleaning Cleaner head onto the end of the tube. 2 1 Nozzle outlet 1 The 2 position head (Depending on model) Push telescopic tube into nozzle outlet. 4 2 Telescopic Push tube telescopic tube into hose handle until catch clicks.
Attachment Point 3 Button Head Flexible Hose 3 Connecting the flexible hose Push the end of the head into the attachment To remove pull on the flexible hose the vacuum the flexible hose from the cleaner, press then point on on the button situated cleaner. vacuum on the head, forward.
How to Open use Using the cleaning the accessory Fit the cleaning cover and pull head and Accessory Nozzles out accessory you want. head onto the end of the tube. 1 2 3 1 Nozzle Upholstery Dusting brush & Crevice Tool frames, furniture outlines, books and other mattresses, etc. uneven The thread collectors Crevice Tool is for to pick up the threads and fluff.
1 3 2 4 4-1 4-2 5 4-3 Head 6 Spring latch 6 5 4 Pedal Head Head 4-1 Head 4-2 Pedal 4 4-1 4-2 4-3 ? 4-3 Pedal Large cleaning head (Depending on model) The 2 position heads equipped with a pedal which allows you to alter its position according to the type of Pedal 5 Sani punch (Optional) Refer to Page nozzle 12~1 . 6 Adjusting the telescopic tube length Telescopic tube ? ? Pull out tube to Release required length. spring latch. floor to be cleaned.
How to use Emptying the dust chamber Button dust chamber The dust chamber needs reaches emptying MAX, which is marked on when the dust the dust chamber. ? Turn off the appliance and unplug it. appliance is equipped with both ? Your the dust chamber and the motor filter. Press the button of the ? cover and the dust chamber forward. Remove the dust chamber cap and empty the dust chamber.
Operation Regulator 1 2 3 FLOOR MAX CARPET SOFA CURTAIN OFF MIN Cord reel button 1 Adjusting ? ? the power level power with the power control switch in the handle. Adjust Push power lever to start the vacuum cleaner. ? To ? Push power lever to start the vacuum cleaner. ? To stop it pull the power lever. stop it pull the power lever.
How to use Cleaning the motor filter/Air cleaner The motor filter is situated under the tank cap and does not need to be changed. Each time the light on, clean the motor filter with comes water and brush and then replace it in the vacuum cleaner. ? Press the button of cover and pull the dust chamber forward. ? ? Open the tank cap. Separate the motor filter by rotaing ? Dry motor filter at least 10 it counter-clockwise. Clean the motor filter with the brush under a day.
Cleaning Cleaning the dust chamber the exhaust filters Plate dust chamber 1 2 Filter cover Wheel 3 Tank cap 1 Open the tank cap. 2 Remove two plates from ? the dust chamber. ? The exhaust filter is so you can use To change cover on the filter cover parts with soft material. Gently rinse both parts under a cold running tap. permanently. the filter, counter-clockwise. Pull out the exhaust filter. ? Clean it with water. use a brush.
User's guide for sani punch How to Features This nozzle The bottom picks up part can even be dust inside separated through beating. nozzle vacuum use Follow the directions below for proper use. to be cleaned. Since the bottom does not stick to the surface, vacuuming is easy. Assembly Connect the nozzle to the telescopic tube. Use Set the suction power control switch to MAX POWER before vacuuming.
This Sani Punch nozzle is for effective Effective cleaning of beds and blankets to remove mites and dust. cleaning Bed & blanket Bulky When using on Lay out the blanket and vacuum it on the bed the bed & heavy When blanket Light using on It is easier to clean by pushing a blanket & sheet the floor light blanket or sheet the nozzle in the direction of the arrow. To increase lay on cleaning efficiency for light blankets, top of a bulky blanket and then clean.
User's For for sani guide simple cleaning of the vacuum and attach the crevice tool to punch vacuum nozzle Cleaning Vacuum Nozzle for nozzle, detach the Sani Punch nozzle from the telescopic tube vacuum dust. Bottom Top Since the vibrator inside is composed of precision parts, never disassemble the body. Be careful not to let foreign objects clog the air sunction part on top of the vacuum nozzle. Since removal of the punch bar may cause performance problems, do not warp or remove it.
Follow the instruction below for (Do not soak the entire body through washing. of the vacuum nozzle in water, it may cause the vibrator to malfunction) Bottom 1 2 plate 3 Punch bar Bottom 4 plate 6 5 Punch bar 1 Press the button rear side of the nozzle to bottom on 2 the Wipe of the vacuum separate the body all the soiled vacuum with a parts 3 nozzle Wash the removed bottom plate with water and dry it. cloth. plate.
What to do if your Check that the appliance is appliance correctly plugged in and that the electrical socket is What to do when the suction the appliance and unplug does not work performance working. reduces? it. ? Stop ? Check that the ? Check that the dust chamber is not full. ? Check that the ? Check that the exhaust filter is not blocked. tubes, flexible hose and cleaning tool. light is not on if necessary. because of motor filter's blockage. Empty Clean the filter. .
Note 17
Note 18
P/No.
