OWNER'S MANUAL V-KC402H* V-KC402H** VCC402H** New Type Cyclone vacuum cleaner
Table of contents Information for Your How to Use Assembling Using the Safety .............................................................................. ...................................................................................................... Cleaner Cleaning ........................................................................................... head and Cleaning the Emptying the Dust Tank Carpet Vacuum Cleaner Accessory Nozzles master and Elbow tube ..............
Information for Your Safety Please read all the following information, which contains important instructions for the safety, the use and the maintenance of the appliance. This appliance complies with the following EC Directives: -73/23/EEC, 93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive. Never allow children to use the appliance unsupervised. Do not use the vacuum as a toy, injury could result. Do not continue to vacuum if any defect appears, missing or damaged.
How to Use Fit the large cleaning Assembling Cleaner head onto the end of the pipe. Elbow pipe (Optional) Spring 2 latch Telescopic pipe 1 ? NZ-50 ? NZ-46 ? (Optional) 1 Large cleaning head Push the head onto the telescopic pipe. 2 (Optional) Telescopic pipe ? ? ? ? 4 NZ-43 Press the spring latch to release. Pull out the pipe to the desired length. Release spring latch to lock the pipe in position. Push telescopic pipe into hose handle firmly.
Head Button Flexible Hose 3 Attachment Point 3 Connecting the hose to the cleaner Push the head end of the flexible hose into the attachment To remove point on the cleaner. vacuum the flexible hose from the body, press on the button located on the head, then pull the head out of the vacuum cleaner.
How to Use Upholstery Using Cleaning nozzle head and Dusting Upholstery Nozzle 2 The Nozzles Crevice tool 3 Dusting Brush Crevice Tool The Crevice Tool will mattresses, etc. furniture, books as The thread collectors uneven will efficiently The 3 Dusting Brush is for using on picture frames, for Upholstery Nozzle is vacuuming upholstery, Accessory brush 2 1 1 the or surfaces. other help clean those hard-to-reach corners, cobwebs or the cushions of your sofa.
1 2 3 4 5 6 (Optional) 4 7 8 (Optional) ? (Optional) Cleaning carpet and floor nozzle Pedal Carpet Carpet Floor 4 Carpet ? ? and floor nozzle Dual the Open to the ? Divide the nozzle into two ? Clean the hole of the nozzle. type of floor. For carpets or rugs parts to lower the brush. pedal For hard floors (tiles, parquets cover by pulling the hook.
How to Use Pile Cleaning the carpet master and Elbow tube Adjustment Cleaning 5 Powerful Turbine Brush 6 Open Long Carpet Spring 2 latch 1 Short Open Carpet Top Spring latch Bottom 5 Carpet ? ? Open Open master the window the cover (Optional) by pulling 6 the hook. at the bottom by pulling ? Clean the brush. ? Clean the brush and hole at the bottom. ? Slide the Pile Elbow the hook. to the carpet.
How to Use Emptying the Dust Tank PUSH Tank handle Dust drop Pull out Dust Tank Tank The dust tank needs ? Turn off the ? Grasp emptying vacuum separation when Lever LED is turned to red. cleaner and the handle of the tank the tank ? Separation unplug it. and then push CAUTION When suction power suddenly operates in Auto mode. lever. Pull out the tank. the tank and then push the tank into the cleaner.
How to Use Vacuum Cleaner Cord reel button Operation Suction control switch 2 1 3 POWER CONTROL FLOOR CARPET MAX SOFT CURTAIN OFF MIN Plug 1 How to Plug in and Use 2 Adjusting the 3 Park System Suction power ? Pull out the power cord to the desired length and plug into the socket. ? ? ? the suction level Adjust using the by ? handle slide control. ? To store after vacuuming and pause while cleaning.
How to Use Cleaning the Dust Tank Pull out ? Check the dust tank is full by the position indicated as "MAX" in the container. ? Press the lever of tank handle and ? Empty ? Wash tank with water. ? Dry dust by pressing the dust pull the dust tank out. empty button it in shade until the moisture is WARNING! as figure. The ? fully removed. - cleaning. Every 6 months. When the indicator light comes on.
How to Use Cleaning the Dust Tank Cover deco Cap dust CLICK! Push in empty button ? Remove the COVER DECO ? Wash the dust tank. ? Dry it in shade until the moisture is fully removed. Adjust the arrow of the COVER DECO to the arrow of the CAP DUST. Assemble the COVER DECO by rotating it clockwise. When connecting the tank to the main body, push it until you hear 'clattering'. ? ? by pressing the dust Empty ? 12 dust ? by rotating as figure. it counter-clockwise.
How to Use Cleaning the Air Filter(Pre- Filter) Micro Filter Filter Sponge Filter Cover The dust filter is located below the filter as in above If the firstly ? figure. LED is lighted up when the dust tank is not clean the air filter. Release the lever of the main arrow ? ? cover Open mark as the filter body toward the figure. cover cover. filter, sponge filter with water.
How to Use Cleaning the Exhaust Filter White side Filter ? ? White side White side cover The exhaust filter is permanent washable HEPA filter. To clean the exhaust filter, remove the filter cover on a the ? ? ? ? body by rotating the filter cover counter clockwise. Separate the filter assembled with the filter cover. Wash the filter in flow water cleanly. WARNING! When you wash the blue side. filter, make sure ? don't wash the - ? fully removed.
What to do if your Check that the vacuum cleaner is in plugged ? Turn off the ? Check the ? Check that the dust tank is not full. ? ? cleaner and telescopic pipe, unplug and that the electrical socket is correctly What to do when suction vacuum cleaner does not work vacuum it. flexible hose and pre-filter(air-filter) decreases performance cleaning tool for blockages if necessary. Check that the exhaust filter is not blocked.
P/No.
