Owner's Manual

15
Check that the vacuum cleaner is
plugged
in
correctly
and that the electrical socket is
working
?
Turn off the vacuum cleaner and
unplug
it.
?
Check the
telescopic pipe,
flexible hose and
cleaning
tool for
blockages
or obstructions.
?
Check that the dust tank is not full.
Empty
if
necessary.
?
Check that the exhaust filter is not blocked. Clean the exhaust
filter,
if
necessary.
?
Check that the
pre-filter(air-filter)
is not full. Clean the
pre-filter,
if
necessary.
What to do
if
your
vacuum cleaner does not work
What to do when suction
performance
decreases
Thermal
protector:
This vacuum cleaner has a
special
thermostat that
protects
the cleaner in case of motor
overheating.
If the cleaner
suddenly
shuts
off,
turn off the switch and
unplug
the cleaner.
Check the cleaner for a
possible
source of
overheating
such as a full dust
tank,
a blocked hose or
clogged
filter.
If these conditions are
found,
fix them and wait at least 30 minutes before
attempting
to use the cleaner.
After the 30 minutes
period,
plug
the cleaner back in and turn on the switch. If the cleaner still does not
run,
contact a
qualified
electrician.
WARNING!
Should it become
necessary
to
replace
the moulded
plug
then the detective
plug
should be
replaced by
a
qualified
electrician.
Disposal
of
your
old
appliance
1. When this crossed-out wheeled bin
symbol
is attached to a
product
it means the
product
is covered
by
the
European
Directive 2002/96/EC.
2. All electrical and electronic
products
should be
disposed
of
separately
from the
municipal
waste stream
via
designated
collection facilities
appointed by
the
government
or the local authorities.
3. The correct
disposal
of
your
old
appliance
will
help prevent potential
negative
consequences
for
the environment and human health.
4. For more detailed information about
disposal
of
your
old
appliance, please
contact
your city
office,
waste
disposal
service or the
shop
where
you purchased
the
product.