Owner's Manual

33
Operation
Copying from DVD To VCR
This unit allows you to copy the contents of a DVD to
a Video tape with a press of the REC/ITR button.
Notes:

If the DVD you are attempting to copy is copy
protected, you may not be able to copy the disc.
1. Insert Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
2. Insert Video tape
Insert a blank videotape into the VCR deck.
3. Copy the DVD to Video tape
Press the REC/ITR button.

The DVD will go into Play mode and the VCR
will go into Record mode.

If the DVD disc menu appears, you may need
to press the Play button manually to begin
copying.
Note:
Make sure the player is in DVD mode.
4. Stop the Copy Process
When the DVD is finished playing, press STOP to
end the copy.

You must stop the Copy process manually
when the DVD movie ends, or the unit may
replay and record over and over again.
Recording from another video
player
With this video player you can make recordings from
an external source, such as copying from another
video player or a camcorder.
Note:
In the following description, this video player will be
one used for recording and will be referred to as VCR
B. The other appliance will be used for playback and
will be referred to as VCR A.
1. VCR A should be connected to the AUDIO (L/R)/
VIDEO (VCR IN AV1) on the rear panel of this unit
or AUDIO IN(L(MONO)/R)/VIDEO IN on the front
of this unit.
2. Insert the recorded tape into VCR A and a blank
tape into VCR B.
3. Press AV until the socket you wish to record from
is displayed. (VCR B)
AV 1 for recording from AUDIO (L/R)/ VIDEO
(VCR IN AV1) terminals on the rear of your unit.
AV 2 for recording from AUDIO IN (L(MONO)/R)/
VIDEO IN terminals on the front of your unit.
4. To start recording, press the REC/ITR on VCR B
and PLAY on VCR A.
5. When you want to finish copying, press the STOP
on both video players.