Owner's Manual

Operation

Managing the Directory

If you have access to the local directory, you can add, remove or edit entries.

Adding an Entry to the Directory

You can create up to 1 000 entries in the directory. To add an entry in the directory, follow these steps:

1. From the main screen, press DIRECTORY on the remote control or select [Directory] button the main screen and press OK to access the

directory.

2. Use the arrow buttons to select [Add] and press OK or press

lll

The Add to Directory window is displayed.

3. Use the arrow buttons to select the Name field. Press OK to enter a value.

If necessary, use 1/a/A to change the method of text entry for text fields or select the keyboard icon to display the virtual keyboard. After

entering a value, hide the keyboard (if you used it to enter the value) and press OK to exit the field.

4. Use the arrow buttons to select the Address field. Press OK to enter a value.

If necessary, use 1/a/A to change the method of text entry for text fields or select the keyboard icon to displayed the virtual keyboard.

After entering a value, hide the keyboard (if you used it to enter the value) and press OK to exit the field.

5. Use the arrow buttons to select the Group item and press OK. Select a group and press OK.

NOTE

If you make a new group, do the following steps.

5-1. Select [New] and press OK. The new group window is displayed.

5-2. Enter the new group name and press OK. Select OK of the window and press OK to confirm it.