OWNER’S MANUAL CLEANING ROBOT Before using, please carefully read the Safety Precautions pages to allow for safe operation of the product. After reading this manual, please keep it in an easily accessible location. VR634* ser. VR635* ser. www.lg.
FEATURES Corner Master By having adopted a brand new concept design that is appropriate for walls, the Robot Cleaner's cleaning performance is incredibly efficient. Learning Mode The Robot Cleaner is capable of memorizing the cleaning environment via its Smart Operation feature for smarter cleaning. Turbo Mode In the "Turbo" mode, the Robot Cleaner operates the suction motor and the brushes at a greater speed giving cleaner results.
CONTENTS 1 BEFORE USING 2~5 Safety precautions 6 Included with product 7~8 Parts description 9~10 Button functions 11 Display status information 12 Before you start 13 Overview 2 METHOD OF USE 14 15 16 17 18~19 20 21 22 23~24 How to install the home station How to turn the Robot Cleaner power supply on & off How to start and stop cleaning How to charge the battery Cleaning modes Auxiliary cleaning modes Mop cleaning (option) Location search function Smart diagnosis 3 HANDLING METHOD AFTER U
SAFETY PRECAUTIONS The purpose of the safety precautions described below is for the user to use the product safely and correctly to prevent any unexpected risk of injury or damage. Basic safety precautions After reading this manual, please keep it in an easily accessible location. This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property damage and/or serious bodily harm or death.
SAFETY PRECAUTIONS WARNING Make sure the power cord of the home station is not crushed under a heavy object or damaged by contact with sharp objects. Do not use the Robot Cleaner when candles or fragile objects are placed on the floor. Doing so can cause fire or product failure. Failure to follow this warning can cause electric shock, fire or product failure. If the power cord is broken, do not plug it in. Take the product to an LG Electronics Authorised service repairer.
SAFETY PRECAUTIONS CAUTION Frequently empty the dust bin and maintain its cleanliness. Do not drop the Robot Cleaner or subject it to strong impacts. The dust collected in the dust bin can trigger allergies and may contain harmful insects. it should be cleaned after each use. Doing so can cause injury or product failure not covered by the warranty. Use the Robot Cleaner indoors only. Do not expose the Robot Cleaner to cold temperatures (less than 10 C) for a long period of time.
SAFETY PRECAUTIONS CAUTION If the floor is wet or has wet spots, wipe them up before using the Robot Cleaner. Do not use the Robot Cleaner on a wet surface. Doing so can cause product failure. When attaching the mop, ensure that it is fitted correctly so that it does not block the lower camera sensor. Blocking the bottom camera sensor may not allow the product to work correctly. (Some models may not have the sensor.
INCLUDED WITH PRODUCT Robot Cleaner Remote controller Home station s Figures can be different from actual objects. GUIDE D'UTILISATION ASPIRATEUR ROBOT GUIDE RAPIDE ASPIRATEUR ROBOT Ce guide décrit brièvement comment utiliser l'aspirateur robot. Pour plus de détails, veuillez consulter le manuel de l'utilisateur.a Veuillez lire attentivement ce qui suit avant d'installer et de mettre en service le produit.
PARTS DESCRIPTION - ROBOT CLEANER Plan view Upper camera sensor Dust bin cover Display & function buttons Dust bin compartment release button Front view Ultrasonic sensors Obstacle detecting sensor window Detecting sensors of home station & Receiving sensors of remote controller Rear view Main Power switch Ventilation port Bottom view Cliff detection sensors Side brush Charging terminals Brush Wheel Battery housing Lower camera sensor (option) s Figures can be different from actual objects.
PART DESCRIPTION – HOME STATION / DUST BIN Home station Remote controller holder Charging terminals Power switch Power cord fixing hook Dust bin Dust bin handle Cleaning brush Dust bin lid Suction port flap Sponge filter Dust bin lid opening button HEPA filter Filter cover 8 s Figures can be different from actual objects.
BUTTON FUNCTIONS – ROBOT CLEANER TURBO • If the button is pressed, ‘Turbo Mode’ will be set with a voice confirmation. • If the button is pressed whilst in ‘Turbo Mode’, it will be canceled. START/STOP • Used to turn the power on from Standby, start or stop cleaning. • If the button is pressed whilst the unit is powered ON, it will start cleaning. • If button is pressed during the cleaning, it will stop the cleaning. • If the button is pressed for about 2 sec.
BUTTON FUNCTIONS – REMOTE CONTROLLER Start Pressing this button will start the cleaning. (p16) Mode Change the Cleaning Mode of Roboking to ZigZag Mode.(p18) Home Used to recharge the Robot Cleaner by making it return to the Home Station. (p17) Turbo Used to activate or deactivate 'Turbo' mode. (p20) Directional button This button enables Manual Operation and selection of an area in 'My Space cleaning' mode. Stop/OK Pressing the button will stop the Robot Cleaner.
DISPLAY STATUS INFORMATION Turbo Mode icon This indicates the settings for Turbo Mode. Operational Status icon This indicates the operational status of Roboking. Repeat Mode icon This indicates the settings for Repeat Mode. Homing icon This indicates the conditions of Homing and Charging. Mute icon This indicates the settings for Voice Alert.
BEFORE YOU START Check these items before cleaning • Do not use this device in a room where a child is left alone. The child could be injured. • Remove fragile or unnecessary objects from the room to be cleaned. Especially, remove expensive ceramics and valuables from the floor. • Close the cover of the dust bin compartment before cleaning. • Remove any moisture that might be on the floor. • Remove cables, strips, towels, mats etc. from the floor so they will not get tangled in the brushes.
OVERVIEW 1 2 3 4 5 6 < Warning > Install the home station. (p14) Insert the power cord plug into an outlet and locate the station against a wall. If power is not supplied to the home station, the Robot Cleaner will not charge. 1.5 1.5 2 Turn on the power supply of the Robot Cleaner. (p15) Turn ON the power switch on the rear-left of Robot Cleaner, and press the 'Start/Stop' button on the top. ※ If the power supply is not turned on, refer to page 15. ﻣﺘﺮ1.5 ﻣﺘﺮ1.
HOW TO INSTALL THE HOME STATION How to Install the Home Station 1. Position the home station against a wall on hard level flooring to prevent sliding during docking. Remove objects within 1.5 m to the right and left side and within 2 m to the front. 1.5 1.5 2 2. Plug the power cord into an outlet. Wrap the remaining power cord around the fixed hook on the back side of the home station or along the wall surface so that the travel path of the Robot Cleaner will not be obstructed. ﻣﺘﺮ1.
HOW TO TURN THE ROBOT CLEANER POWER SUPPLY ON & OFF Turning on the main power supply Make sure the Power Switch is on at the rear-left of the Robot Cleaner. If the power is OFF, turn the switch ON. ※W hen turning on the power switch, do not press or touch any button located on the upper section of the Robot Cleaner. Button operations can be delayed. ※ Turn off the power switch if the Robot Cleaner is not used for a long period of time in order to protect the battery.
HOW TO START AND STOP CLEANING Using the buttons on the Robot Cleaner After the Robot Cleaner main power switch is turned on, press the START/STOP button to begin cleaning. A melody will sound and cleaning will begin. Press the START/STOP button during the cleaning cycle to stop cleaning. ※ When the ‘START/STOP’ button is pressed while the power supply of the Robot Cleaner is in Standby, the power will be turned on. Press the ‘START/STOP’ button one more time to start cleaning.
HOW TO CHARGE THE BATTERY Automatic charging The Robot Cleaner returns to the home station at the end of a cleaning cycle or when its battery is running low. ※ If 10 minutes elapse without the Robot Cleaner moving or the battery is too low, the power will be automatically turned OFF. ※ Do NOT turn OFF the Main Power Switch as the battery will not be recharged.
CLEANING MODES Zigzag Cleaning In 'Zigzag Clean' mode, Robot Cleaner repeats a zigzag operation to clean each and every spot in the cleaning area. If you need to quickly clean an area choose 'Zigzag Clean' mode. Press ‘Mode’ button on Remote Controller to select 'Zigzag Clean' mode and press 'Start' button. ※ Factory release default setting is 'Zigzag Clean.' Manual cleaning By pressing a direction key on the Remote Controller, you can move Robot Cleaner in a Manual mode.
CLEANING MODES My Space Cleaning Pressing 'My Space' on the Remote Controller will set the My Space cleaning mode with a voice message. For cleaning of particular spaces, select this mode. The 1st stage: Use the Remote Controller to manually set the parrameters of each cleaning block. ※ This cleaning mode will be accepted when the distance of the start and end position is less than 1 m.
AUXILIARY CLEANING MODES Turbo Mode Pressing the 'Turbo' button on the Remote Controller or main unit will activate 'Turbo' mode, with a voice message. While in 'Turbo' mode, pressing the same button will cancel 'Turbo' mode, with a voice message. In 'Turbo' mode, Robot Cleaner runs more intensely for a powerful clean. Mode mode will reduce the battery duration. Repeat Mode Pressing 'Repeat' button on Remote Controller will activate 'Repeat' mode, with a voice message.
MOP CLEANING (OPTION) By attaching the ultra microfiber mop, you can effectively use the Robot Cleaner to remove dust on hard floor surfaces. When the mop plate is attached, the Robot Cleaner will not climb on to carpets or over thresholds, in order to prevent transferring dirt from the mop. Caution Do not cover the bottom camera sensor by mop. For mop cleaning, mount the mop and mop plate to the Robot Cleaner according to the following instructions: 1.
LOCATION SEARCH FUNCTION The Robot Cleaner remembers its location while cleaning. If the user moves the Robot Cleaner while it is operating, it will search for the location it was moved from by using its navigational location search function before continuing to clean. ※ The navigating function will be activated after the Robot Cleaner adequately recognizes the cleaning environment. Change location Manual Relocation. 1.
SMART DIAGNOSIS Robot Cleaner uses this Smart Diagnosis feature to run a self-diagnosis. If any irregularity is found from the diagnosis, please contact the local LG Electronics service center. ※ During Smart Diagnosis, the Robot Cleaner will move about within a 50 cm radius. So, make sure no objects are in the way within a 1 m radius around the Home Station, before starting Smart Diagnosis. 1.
SMART DIAGNOSIS If a voice message is announced after Smart Diagnosis, refer to the following table to take proper actions. Voice message Starting Robot cleaner smart diagnosis. Please step away and remove any items within 1 meter, or about 3 feet. Robot cleaner needs to be charging in order to activate smart diagnosis. Please dock the Robot cleaner to the home station. Starting Robot cleaner smart diagnosis. Reservation has been cancelled for smart diagnosis.
CLEANING THE DUST BIN If the dust bin is full, suction power can be reduced. Clean the dust bin before or after each cleaning session. Clean the dust bin using the following sequence: 1. Open the dust bin compartment cover by pressing the PUSH button on the Robot Cleaner. 2. Grab the handle of the dust bin and pull it upward. 3. Pull the hook on the left of Filter Cover on the rear of Dust Bin to separate the filter and the sponge. ※ Note that separating the filter may result in dust dropping.
CLEANING THE DUST BIN FILTER The Dust Bin Filter consists of a HEPA Filter and Sponge Filter. Clean both the HEPA and Sponge filters as per the following sequence. 1. Pull the hook on the left of the HEPA Filter module on the rear side of Dust Bin to separate the HEPA Filter and the sponge. 2. Thoroughly clean out the fine dust particles on the HEPA Filter, with a vacuum cleaner or cleaning brush. ※ Do NOT wash the HEPA Filter with water. Its suction power will be reduced. 3.
CLEANING THE BRUSH The rotating Brush, located on the bottom of Robot Cleaner, helps collect the dust. Clean the Brush as per the following sequence. ※ Before turning over the main unit, lay a soft cloth on the floor and remove the Dust Bin. Otherwise, the main unit can get scratched and dust will fall from Dust Bin. Turn the Main Power Switch OFF before starting the clean. Put the Robot Cleaner upside down on a soft cloth.
CLEANING THE SENSORS/CHARGING TERMINALS There are sensors on the Robot Cleaner that detect obstacles, stairways and the home station for charging the battery. In order to maintain the performance of the Robot Cleaner, regularly clean the sensors and charging terminals as follows: 1. Turn off the power switch on the rear side of the Robot Cleaner. Injury can be caused by the activation of the Robot Cleaner if the main power is not turned off. 2.
CLEANING THE SIDE BRUSH Foreign objects/materials such as hair can easily adhere to the side brush. Remove such materials at least once a week. If excessive amounts of foreign materials are stuck to the brush, there is the risk of damage to the brushes. If the floor is rough or frequently cleaned, the side brushes may bend or become damaged. In this case, use the following method to straighten the side brush. 1. The following procedure is helpful in restoring deformed brushes. 2.
CLEANING THE ULTRA MICROFIBER MOP (OPTION) To avoid odors, dirt and dust should be washed off the mop after it is used for cleaning. Follow these directions to wash the ultra microfiber mop: 1. Separate the ultra microfiber mop from the mop plate. 210 mm 2. Carefully clean it with warm water. 3. Use the Mop after completely drying it in direct sunlight. ※ If the Mop is used in a damp or wet state, it will cause the Robot Cleaner to malfunction.
TROUBLESHOOTING Upon a voice message, "The wheels are not touching the floor. Please move Robot cleaner onto flat floor." A warning message will be given if a wheel does not contact the floor surface for any reason. • Is a wheel trapped in the front door, balcony, stairway, etc? s Move the Robot Cleaner on to the flat floor. Upon a voice message, "Please remove any foreign material on the left/right wheel.
TROUBLESHOOTING Upon a voice message, "Please check that the dust bin and filter are properly installed." A warning message will be given if there is no Dust Bin or Filter housing fitted. • Is the Dust Bin fitted to the Robot Cleaner? s Open the Dust Bin compartment cover and check to ensure the Dust Bin is in place. s Do NOT leave the Dust Bin Cover open. • Make sure the Filter housing is assembled onto the Dust Bin. Upon a voice message, "Battery is low.
TROUBLESHOOTING Upon a voice message, "Please remove any foreign material from the brush on the bottom." A warning message will be given if foreign materials restrict the Brush's rotation. Turn off the main power switch on the rear of the Robot Cleaner. Lay a soft cloth on the floor and put the Robot Cleaner upside down on it. ※ Before turning over the main unit, remove the Dust Bin. Otherwise, it will cause dust to fall from Dust Bin. • The brush is making a loud, abnormal sound.
BEFORE YOU CALL FOR SERVICE Confirm before reporting the failure of Robot Cleaner. Problem 34 Solutions (Reference page) The power supply cannot be turned on. Check that the power switch is turned on. (Page 15) The power supply automatically turns off. This is not a failure. Robot Cleaner has its own power saving function. If it is not used for ten minutes after the power supply is turned on, the power will automatically turn off. (Page 17) The Robot Cleaner will not charge.
PRODUCT SPECIFICATIONS Item/Model LG Robot Cleaner VR634*, VR635* ser. External Dimensions 340 mm × 340 mm × 89 mm Weight 3 kg Power Consumption 18 W Battery (Fully Charging) DC 16.8 V Traveling Velocity 350 mm/s (Maximum) Use Time Approx.
REFERENCE ITEMS Open source software notice To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. Dis/Assembling the battery 1 2 Turn off the main power switch on the back-left side of the Robot Cleaner.
Disposal of waste batteries/accumulators 1. When this crossed-out wheeled bin symbol is attached to batteries/accumulators of Your product it means they are covered by European Directive 2006/66/CE. 2. This symbol may be combined with chemical symbols for mercury(Hg), cadmium(Cd) or lead(Pb) if the battery Contains more that 0.0005% of mercury, 0.002% of cadmium or 0.004% of lead. 3.
Made in Korea
