User Guide

9
Because the product is designed to operate at multiple power levels and to use only the power required to
reach the network, in general, the closer you are to a wireless base station antenna, the lower the power
output.
The highest SAR value for this model product when tested for use at Next-to-Mouth(Face) is 0.11 W/kg(1g)
and for body-worn(Wrist) is 0.60 W/kg(10g).
While there may be differences between SAR levels of various phones and at various positions, they all meet
the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this model product with all reported SAR levels
evaluated as in compliance with the FCC RF emission guidelines.
SAR information on this model product is on file with the FCC and can be found under the Display Grant
section of http://transition.fcc.gov/oet/ea/fccid/ after searching on FCC ID ZNFW110.
Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications
Industry Association (CTIA) website at http://www.ctia.org/.
* Product meets current FCC & IC Radio Frequency Exposure Guidelines
FCC ID : ZNFW110
IC ID : 2703C-W110
US/Canada declarations of conformity (Part15.105
statement)
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference with
radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference or television reception, which can be determined by turning the equipment
off and on, you can try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.