VCP OWNER'S MANUAL MODEL: W141F PAL Before connecting, operating, or adjusting this product, please read this instruction booklet carefully and completely.
PRECAUTIONS Please read these SAFETY PRECAUTION ? THIS EQUIPMENT MUST BE DISCONNECTED FROM THE ? MAINS POWER SUPPLY WHEN precautions before you operate this unit. Avoid extreme heat, cold, moisture and dust. Avoid using near a magnetic field. (This ITISNOTINUSE.DONOT ? ALLOW THIS UNIT TO BE will adversely agent such EXPOSED TO RAIN OR MOISTURE. ? CAUTION TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE THE ? COVER. NO USER SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO ? QUALIFIED PERSONNEL.
REMOTE CONTROL You can control almost all the functions of the VCP with the wireless remote control. The Remote Control must have "Line of in an angle of 30 degrees to the Remote Sensor Sight" on OPERATE and off. on To PLAY playback operating eject OPERATE video cassette. EJECT REW the tape during the STOP mode, or for fast ture search (REVIEW tape during STOP for fast forward picture (CUE mode) during the or PLAY mode. REWIND/REVIEW ing tape.
FRONT VIEW REMOTE SENSOR WINDOW FUNCTION INDICATORS Indicates the status of this unit. Receives infrared rays from remote control unit. OPERATE and INDICATOR CASSETTE COMPARTMENT To turn the unit Insert on When this button is and off. pressed a cassette in the compartment. to ON, the OPERATE indicator lights. PLAY To OPERATE STOP/ EJECT P/STILL playback PLAY CST.IN A.TRK REC A.REPEAT REC video cassette. PLAY REW/ REC STANDBY a /FF (RECORD) recording.
REAR VIEW AERIAL IN TERMINAL AUDIO OUT Connect the external antenna to this terminal. input terminal on (Audio System, TV/Monitor, RF CHANNEL CONTROL VIDEO OUT Turn this control to set the video channel the video (CH32-CH40) correctly (whichever being used in your area). JACK; Connect this terminal the audio Another an to external unit VCR). JACK; Connect this terminal input terminal on (TV/Monitor, Another VCR).
INSTALLATION CONNECTION (AERIAL) Aerial Coaxial connector cable AERIAL VIDEO IN AUDIO IN 40 PREATION (provided) To RF OUT 32 CHANNEL OUT AERIAL AUDIO VIDEO + DC IN 12V IN To AERIAL 1 Remove the coaxial aerial cable from your TV set. Place this cable into the terminal marked on the VCP. "AERIAL" 2 Connect the aerial terminal supplied coaxial 3 Plug into the AC TV viewing To watch a on your TV set to the RF Socket Output on the VCP with the connector cable. outlet.
DC POWER SOURCE The VCP is designed for in-home or portable use. You power it from standard AC adaptor, from the cigarette socket in your vehicle, or a 12V DC power source. can lighter DC INPUT JACK TV MONITOR Plug this adaptor into either the 12 volt DC outlet or cigarette lighter socket. Plug the small plug into the DC input jack on the VCP. WARNING: When the unit is not in use, from the car cigarette lighter always disconnect battery drain.
THE VIDEO CASSETTE LOADING Insert the video cassette with the window side up and the label you. Press the middle of the tape slowly. facing UNLOADING Press the STOP/EJECT(or EJECT) button in the STOP mode. The cassette compartment will open and the video automatically be The cassette as long as partially ejected. may also be ejected without engaging sure POWER ON the VCP is connected to the wall outlet. When the VCP is not in Make cassette will use....
NORMAL PLAYBACK TO START PLAYBACK 1 Turn on the TV and set the video channel same as OPERATE selected on your TV, the video's RF channel control. 2 Insert a pre-recorded video cassette, the VCP is turned on automatically and playback starts automatically. If the cassette has a safety tab, press the PLAY button to start playback. 3 After EJECT the tape, press the STOP(or STOP/EJECT) stop playback. Press the STOP/EJECT(or EJECT) remove the tape.
PLAYBACK VARIATIONS You can enjoy (SPECIAL EFFECTS) your playback picture VISUAL SEARCH OPERATE EJECT PLAY (CUE in various and playback modes: REVIEW) During PLAYBACK mode... 1 Press the desired search button (REW or FF) once to begin visual search. The tape will be played back in forward or reverse direction about 7 times (PAL recorded tape)/5 times (NTSC recorded tape) faster than the normal playback speed. 2 Press the PLAY button to resume normal speed playback. NOTE REW FF STOP A.
PLAYBACK VARIATIONS (SPECIAL EFFECTS) STILL PLAYBACK 1 (FRAME ADVANCE) Press the P/STILL button to stop the picture on the screen during playback. 2 During OPERATE normal EJECT still playback, playback. press the PLAY button to return to NOTES The still picture may be unstable or noise bars may appear. playback mode, press the P/STILL button again to minimize the noise bars and press the TRACKING ( or ) buttons to eliminate the vertical jitters.
RECORDING Aerial TV set RECORDING This recording AUDIO/VIDEO 1 used only to a TV with a TV shown left. as and select the programme you wish to record with the TV's channel selector. AUDIO the TV be can output jacks. Connect the VCP to 2 Turn VIDEO (LINE) method on IN OUT 3 AERIAL Insert a piece of cassette with tab in place, or cover the hole with a cellophane tape. AUDIO/VIDEO Perform the OUT recording procedures To a begin below.
ON SCREEN DISPLAY Some of these functions will be displayed every time the VCP is operated. FUNCTION DISPLAY Indicates the function in progress. TAPE REMAINING DISPLAY COUNT DISPLAY S Shows the E tape counter on the tape. Each press of the DISPLAY button Beginning End of the of the tape tape OPERATE following changes the TV screen in the sequence.
BEFORE REQUESTING SERVICE Check the following points before calling a service representative. CHECK POINT & CORRECTION SYMPTOM No power... Check that the Power ? Plug is connected to its power completely source. Video cassettes can't be inserted... ? Check that the OPERATE button is set to ON. ? Check that the power cord completely connected to its source. Insert the cassette with the window side up and the safety tab facing ? you. RECORD mode can't be Place ? engaged...
P/NO : 3834RP00 24Q