Owner's Manual

REMOTE CONTROL
3
You can control almost all the functions of the VCP with the wireless remote control. The Remote
Control must have "Line of
Sight"
to the Remote Sensor on the front of the VCP. It must be with-
in an
angle
of 30
degrees
either side of centre. The maximum
operating
distance is about 25 feet.
OPERATION OF REMOTE CONTROL
Aim the remote control unit at the sensor on the front
panel
of
the VCP.
HOW TO INSTALL
THE
BATTERIES
1 Slide the
battery compartment
cover in the direction of arrow.
2 Insert 2 "AAA"-size batteries in the correct direction.
3
Replace
the cover.
?
If the
range
is
short,
try
new batteries.
?
An
object
between the VCP and remote control unit
may
block
the invisible
light
beam and
operation
will be
impossible.
?
Batteries installed backwards
may
leak and
damage your
Remote Control.
?
Do not mix old and new batteries or carbon
types
with
alkaline
types.
?
Remove the batteries from the
battery compartment
if the
remote control will not be used for a
long
time.
NOTES
OPERATE EJECT
PLAY
STOP
REW FF
P/STILL A.REPEAT
DISPLAY TRK
REC
FAST FORWARD/CUE
To advance the
tape during
STOP
mode,
or for fast forward
picture
search
(CUE mode) during
the
PLAY mode.
STOP
To
stop
the
tape (in any mode).
PLAY
To
playback
a video cassette.
OPERATE
To turn the unit on and off.
REC
(RECORD)
To start
recording.
REWIND/REVIEW
To rewind the
tape during
the
STOP
mode,
or for fast reverse
pic-
ture search
(REVIEW mode)
dur-
ing
the PLAY mode.
MANUAL TRACKING
( / )
To clear streaks if
they appear
on the
TV screen in the
playback
mode.
DISPLAY
To
display
functions on the TV
screen
(see page 13.)
AUTO REPEAT
To
play
back a
tape repeatedly.
(See
"AUTO REPEAT FUNCTION"
on
page 11.)
P(PAUSE)/STILL
To still
picture during playback (see
page 11),
to
pause during recording
(see page 12.)
EJECT
To
eject
the
tape.