Manual

• & Buttons Use these buttons to select or adjust functions inthe On
Screen Display.
JCENGINE •
Use this function to select optimal image conditions in
accordance with the surrounding environment
(Brightness, Image type).
For more information, refer to page 15.
SOURCE •
(SOURCE Hot key)
When two input signals are connected, you can select the
input signal (D-SUB/DVl) you want. When only one signal
isconnected, it is automatically detected.The default
setting is D-Sub. (Only W1943TBAN2043TF_JW2243T)
_ UTO/SET
Button
Use this button to enter a selection inthe On Screen
Display.
AUTO iMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
W1943SB/W1943TB : 1360 x 768
W2043SE/W2043TE : 1600 x 900
W2243S/SN2243T : 1920 x 1080
O Power Button &
Power indicator
Use this button to turn the display on or off.
The power indicatorstays red ifthe display is running
properly (On Mode). If the display isin Sleep Mode
(Energy Saving), the power indicatorisblinking red.
O