Owner's manual

A22A22
Specifications W2442PA
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
& Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base
Power cord
24 inches (60.9 cm) Flat Panel Active matrix-TFT LCD , Anti-
Glare coating
Visible diagonal size: 60.9 cm
0.276*0.276 mm pixel pitch
Horizontal Freq. Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 83 kHz (Automatic)
Vertical Freq. Analog,Digital: 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative
SOG (Sync On Green), Digital (HDCP)
Signal Input 15 pin D-Sub Connector
DVI - D connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital,HDMI
Max Analog : VESA 1920 x 1080 @60 Hz
Digital : VESA 1920 x 1080 @60 Hz
Recommend VESA 1920 x 1080 @60 Hz
DDC 2B(Digital,HDMI) ,DDC 2AB(Analog)
On Mode
: 42W(Typ.)
Sleep Mode ≤ 1 W
Off Mode ≤ 1 W
With Stand Without Stand
Width 58.22 cm / 22.92 inches 58.22 cm / 22.92 inches
Height 43.75 cm / 17.22 inches 35.40 cm / 13.94 inches
54.75 cm / 21.55 inches
Depth 27.02 cm / 10.64 inches 6.01 cm / 2.37 inches
Net 6.2 kg (13.78 lbs)
Tilt -5˚(
2˚)~ 18˚( 2˚)
AC 100-240V~ 50/60Hz 1.2A
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type or PC-outlet type
NOTE
Information in this document is subject to change without notice.