Owner's Manual

ENGLISH
66
Receiving Data or Fax Calls - Single number
If you have a SIM card that does not support separate voice, data and fax
numbers, the phone does not recognize the type of incoming call.
To use a data or a fax service, make sure that you want to receive a data
or fax call mode. You first have to set the phone to one of these options in
the call mode (Settings ➝ Call Setting ➝ Next Incoming) sub menu.
To receive a data or fax call
1. Press [Menu] in standby mode.
2. Select the Settings ➝ Call setting ➝ Next Incoming.
3. Select the call type you want (Voice, Data or Fax) and press
[Select].
4. Connect your computer to the phone.
5. After starting the communicate software, accept a call and receive a
data or fax (if it is not answered automatically).
6. After the data or fax reception, you can end the call by just ending of
the communicate software, pressing [End] or by closing the folder.
Once you have set your phone for a specific incoming call, it remains set
until you change it.
How to Use Data and Fax call
Additional Functions