Installation Manual

11INSTALLATION
ENGLISH
the instructions for a 4-wire circuit
connection.
3-Wire Connection from Home Power
Supply
WARNING
• The middle (neutral or ground) wire, which is
white, of a 3-wire power cord or a 3-wire conduit
has to be connected to the middle post of the
main terminal block. The remaining two wires of
the power cord or conduit have to be connected
to the outside posts of the main terminal
connection block. Failure to do so can result in
electrical shock, severe personal injury or death.
a Cable from home power supply
b Black wires
c White wires
d Red wires
e Green (or bare) ground wires
f 4-wire flexible conduit from oven
1 Connect the oven ground (green) wire and
neutral (white) wire to the branch circuit
neutral (white or gray) wire, using a wire nut.
2 Connect the oven red wire to the branch
circuit red (L2) wire in accordance with local
codes, using a wire nut.
3 Connect the oven black wire to the branch
circuit black (L1) wire in accordance with local
codes, using a wire nut.
4 Install the junction box cover.
4-Wire Connection from Home Power
Supply
WARNING
• Only use a 4-conductor power-supply cord kit
rated 120/240 volts, 50 amperes and marked for
use with ranges with closed-loop connectors or
open spade lugs with upturned ends. The white
middle (neutral) wire of the power cord or 4-wire
conduit has to be connected to the middle post
of the main terminal block. The other two wires
of the power cord or conduit have to be
connected to the outside posts of the main
terminal connection block. The 4th ground wire
(green) must be connected to the frame of the
oven with the ground screw. Failure to do so can
result in electrical shock, severe personal injury
or death.
a Cable from home power supply
b Black wires
c White wires
d Red wires
e Green (or bare) ground wires
f 4-wire flexible conduit from oven
1 Separate the oven ground and white wires if
necessary.
2 Connect the oven ground (green) wire to the
branch circuit ground (green) wire in
accordance with local codes, using a wire nut.
3 Connect the oven white wire to the branch
circuit neutral (white or gray) wire in
accordance with local codes, using a wire nut.
en-us_main.book.book Page 11 Monday, June 5, 2023 5:24 PM