Owner's Manual

Machine
stops
automatically
after the
programs
are
completed,
and the buzzer
beeps
7 times. After 8 seconds the machine will be
automatically
turn off. Front door can be
opened
1-2
minutes after the end of the
program.
Turn off the water
tap.
Unload the machine
and leave the front door
open
to air the machine.
The selected
program
can be started
by pushing
the Star t/Pause button. Front
door will be locked and the led indicator will
go
on. To
stop
the machine
during
the
program
press
the
start/pause
button
again.
If
fabric softener is added
in
the softener
compartment,
it will be used
in
the last
rinse
cycle.
If rinse hold
is
selected,
by re-pressing
this
button,
you
can continue
the
program.
If
no
spin
is
desired,
you may
leave the
rinse hold
button
pushed.
Pause the
machine,
select the
Drain
option
and Start the machine. With this
operation,
water
in
the machine will be
discharged.
Program operation
Auto Off /
Unloading
the machine
After the start of a
program,
the led of the
ongoing program step
led will turn on. The finished
program step
leds will turn off. As an
example
if maih wash led is
on,
the machine is on the main wash
step.
If the 90 C led tuns
off,
the
heating
is finished.
Program Following
15