Owner's Manual

To
prevent
objects entering
to the
pump,
your
machine comes with a filter
system
that extends the
pump
life. It is advisable that
you
should clean the filter at
every
30-40 washes. Before
opening
the filter
door,
disconnect the
power.
Turn the
opening
of kick
plate
screws 90° with a
help
of screw driver or a coin. Place a
little
pan
infront of the filter door to
prevent
a little amount of water
spilling
from
the machine. Remove the filter
by turning
it counter-clockwise direction. After
cleaning
the
objects
on the
filter,
place
it
by turning
clockwise and make sure that
it is closed
firmly.
Place the kick
plate
and secure it
by locking
the screws.
Attention! If
the filter does not fit into its
place,
water
will leak out from the filter.
Cleaning
the
pump
filter
18