Owner's Manual

The current
requirement
in
order for safe
operation
of this machine is 16
Ampheres.
You will need to have a certified
electrician to connect a 16
Amp
fuse,
if
there is not
enough
current load.
Your
washing
machine is set to 220-230 Volts.
Do not
forget
to check the
grounding
in
all cases of use with or without the transformer. Our
company
will not be
responsible
for
any damages
caused
by
operations
without
grounding.
In
order to
bring
the machine to
ready
before
use,
please
call
your
service technician or a certified
plummer.
The
performance
of the
washing
machine
depends
on the effectiveness of the
cleaning agent.
Stains can be
permanent
if
low
quality detergents
are used. Please take
necessary
effort to clean the stained clothes as described
in
following pages
before
washing
them
in
the machine.
Make sure the Power switch is
in
the off
position
and
always
allow one to two minutes
for the door
safety
lock to release the lock. Pull the handle to
open
the door.
Steps
before
operating
Fullautomatic
Washing
Machine and
safety precautions
Part
1:
To
open
the front door
Due to the
quality
control
processes
during
production,
there
may
be some water left over
in
your
machine.
This does not cause
any damage
to
your
product.
2