LG Product Installation Washer Pedestal Washer
LG Product Installation - Twin Wash (Pedestal Washer) DON’T place product upside down DON’T lay down on side wall Side Top Sliding door damage (some models) Inner Tub assembly damage Bottom Drawer damage Control panel damage
LG Product Installation - Twin Wash (Pedestal Washer) Remove ① Remove packing material ② (foam) Rotate cover 180º and secure Remove blue inner packing from Tub and discard with provided screws To prevent scratches, PRIOR to installing the FLW: Remove blue tape Adhere tape to the edges and drawer to prevent scratches or the drawer opening.
LG Product Installation - Twin Wash (Pedestal Washer)- Installing the Front Load Washer Using the wrench provided make sure the legs of the FLW are fully retracted and level prior to mounting Secure FLW to Sidekick with 16 screws provided. Not using all screws can cause noise and vibration issues. Align and set down the main washer to the holes at each corner of the unit.
LG Product Installation - Twin Wash (Pedestal Washer) – Water Hook Up Remove film from lid main washer Attach 2 short hoses included in the Installation kit to the faucets. Red for Hot / Blue for Cold SideKick Connect the long hoses to the back of the main washer Then connect the other 2 hoses to the back of the SideKick Connect main wash hoses to Y connector. Connect SideKick hoses to the other side of the Y connectors.
LG Product Installation - Twin Wash (Pedestal Washer) Place wide clamp supplied with installation kit around end of Drain Hose. Connect drain hose to SideKick making sure it points up Connect drain hoses to Y drain hose connector. Use clamps provided to secure them. The end of the Y drain hose connector is then inserted in the stand pipe Secure hoses together with supplied tie straps Turn water on and check all connections. Place unit in final position.