Owner’s Manual

Table Of Contents
10 INSTALLATION
INSTALLATION
Before Installing
Tools Needed
a Pliers
b Flat-Blade Screwdriver
c Level
NOTE
For instructions on stacking under a top-load-
matching dryer, see the instructions in the dryer
stacking kit which is available on LG.com.
Scan the QR code to link directly to an install
video tutorial.
Installation Overview
Please read the following installation instructions
first after purchasing this washer or transporting it
to another location.
a Choosing the Proper Location
b Stacking Pedestal Washer and Front-Loading
Washer
c Connecting the Inlet Hoses
d Connecting the Drain Hose
e Leveling the Washer
WARNING
Moving or installation of the appliance requires
two or more people. Failure to follow these
instructions may result in injury.
Store and install the appliance where it will not
be exposed to temperatures below freezing or
exposed to outdoor weather conditions. Failure
to follow this warning can cause product or part
failure, serious injury, fire, electric shock, or
death.
Properly ground the washer to conform with all
governing codes and ordinances. Failure to
follow this warning can cause serious injury, fire,
electric shock, or death.
To ensure proper airflow, do not block the large
opening on the bottom of the washer with
carpeting or other materials.
Do not remove the ground prong from the
power cord. Do not use an adapter or extension
cord. Plug into a grounded 3-prong outlet.
Failure to follow this warning can cause serious
injury, fire, electric shock, or death.
Certain internal parts are intentionally not
grounded and may present a risk of electric
shock only during servicing. Service personnel-
Do not contact the following parts while the
appliance is energized: pump, valve, motor,
control board.
The pedestal washer is for installation and use
only underneath an LG front-loading washer
manufactured after 2009. A special kit is also
available to allow use under an LG top-load-
matching dryer manufactured in 2016 or later.
Do not use the pedestal washer as a standalone
unit, under an LG top-loading washer, or under
any other washer or dryer.
NOTE
The pedestal washer's width must match the
stacked LG appliance's width.
The pedestal washer will not work as a
standalone unit.
The pedestal washer must be stacked under an
LG brand appliance in order to operate properly.
Choosing the Proper
Location
Check the following requirements for the install
location before installing the washer.
Allow for sufficient space between the walls and
the washer for installation.
Make sure that the floor is clean, dry and free of
dust, dirt, water and oil so the leveling feet
cannot slide easily. Leveling feet that can move
or slide on the floor can contribute to excess
vibration and noise.