Owner's Manual

14
Before Starting to Wash
F
unction of each Button
Water Level Button
• Use to select the proper amount of water in relation to
the weight and type of laundry.
• Automatically controlled, but can be selected manually
by pressing the Water Level Button.
• Water is automatically selected for Normal Course.
The following settings are indicated as the button is pushed
7 ▶ 8 ▶ 9 ▶10 ▶1 ▶ 2 ▶ 3 ▶ 4 ▶5 ▶ 6 ▶7
Child Lock Function
• Use to lock or unlock the control
buttons to prevent settings from
being changed by a child. To lock,
push the Rinse buttons and to
unlock push them one more time
during the washing process.
(refer to page 25)
Wash. Rinse. Spin Button
• Use when wash, rinse, spin time
need to be adjusted.
• The time increases when the
button is pressed.
• If adjustments are needed during
the wash, press the [start/
pause] button before making
any changes.
• When the button is pressed
during washing, the remaining
time is displayed.
Air Dry
• This button is used for air-
drying of your laundry.
• Air dry selections light up in
sequence as follows
30 ▶ 60 ▶ 90 ▶ 120
• If you want to use Air Dry,
Press & hold 3 sec. Spin key.
* Even if the water level or the water temperature are changed by the user in Normal Course, the sensor will still
work. The sensor algorithm may differ according to models.
* The control panel may differ according to different models.
NOTE
Beeper Button(Only 1 Valve)
• If you want to use the washing
machine without alarm signal
sounds, press Beeper buttons
allow you to select : High ▶ off
Low ▶ High respectively. Default
setting is High. (refer to page 25)