Owner's Manual

15
Before Starting to Wash
Delay Start (Reservation) Button
• Use to set a delayed finishing time.
• The time increases when the
button is pushed.
• The following settings are indicated
as the button is pushed 3 ▶ 4
▶ 5 ▶ ... 11 ▶ 12 ▶ 14 ▶ 16
▶ 18 ▶ 3 HOUR.
• To cancel delay time, turn the
power switch off.
(refer to page 24)
Course Button
• Use for selecting wash course.
• This button allows you to select 8 different
programs for different kinds of laundry and
dirtiness.
• Course selections light up in sequence as follows
Course 1 : Normal ▶ Wool ▶ Duvet ▶
School Care
Course 2 : Pre Wash + Normal ▶ Quick Wash
▶ Extra Clean ▶ Tub Clean
Select the desired Course by pressing the
button.
START/PAUSE
Button
• Use to start or
pause the washing
process.
• Repeats start and
pause by pushing
the button.
POWER Button
• User to turn the power on or off.
• Push again and power goes on
or off
• The power goes off automatically
about 10 seconds after the wash
is finisher.
Display remaining time, reservation time,
and alarm for trouble
• During operation this indicates time to
finish of laundry.
Ex.) Indicates remaining time of
laundry, rinse, spin dry during operation/pause.
• If there is a trouble, it blinks with buzzer
sound and indicates the source of trouble.
It will work normally after troubleshooting.
Display laundry progress
• Laundry progress is indicated
here.
• Process to be done will
have light on. Process in
progress already done will
have light off
Wash. Rinse. Spin Button
• Use when wash, rinse, spin time
need to be adjusted.
• The time increases when the
button is pressed.
• If adjustments are needed during
the wash, press the [start/
pause] button before making
any changes.
• When the button is pressed
during washing, the remaining
time is displayed.