Owner's Manual

23
Additional Function Course
O
ption Washing
When you only need the Wash , Wash/Rinse or Rinse cycles , these can be set manually.
1
Press the POWER button to turn power on.
2
Only Wash Only Rinse Only Spin
Press the button, select the desired
timing of wash.
Press the button to select the
desired times of rinse.
Press the button to select the
desired times of Spin.
Only Wash,Rinse Only Rinse,Spin Only Drain
Press the button to select the
desired times of wash, rinse.
Press the button to select the
desired times of rinse, spin.
When you want to only drain, wait
until the water in the washing tub
drains completely.
4
Add the laundry into the washing tub.
6
Add the detergent and close the lid.
NOTE
• When a Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the water
will not be drained off. If you wish to drain the water, press SPIN button and wait until water in the tub
has drained completely. Then press the START/PAUSE button.
• If you do not specify the water level, then Medium will be automatically selected.
• If only Rinse is selected, the process will start from Water Supply.
3
5
Press the START/PAUSE button.
Press the Water Level button, to control the water level according to the amount of laundry. If you
do not choose anything, it is set the middle water level automatically.
1)Select
Lamps On
2)select
Lamps Off
3)Select
Lamps Off
1)Select
Lamps On
2)select
Lamps On
3)Select
Lamps Off
Lamps
Off
1)select
Lamps On
2)Select
Lamps On
Lamps
Off
1)select
Lamps On
2)Select
Lamps Off
Lamps
Off
Lamps
Off
2)Select
Lamps Off