Owner's Manual

24
Additional Function Course
D
elay Start (Reservation) Wash
1
Press the POWER button to turn power on.
2
Press the Course button to select the washing course.
• Select the program for laundry on the Control panel. This
program will not work in Wool and Tub Clean Program.
3
Press the Delay Start (Reservation) button.
• The light will ‘Delay’ turn on and ‘Time Left’ will
be marked.
• Press the button repeatedly to set the desired finishing time.
For example, To finish washing in 9 hours from now, Press the
Delay Start button repeatedly until 9:00 appears in the display.
(RES. = Delay)
➨
Delay Start (Reservation) Wash is used to delay the finishing time of the operation.
The hours to be delayed can be set by the user accordingly.
The time on the display is the finishing time, not the start time.
4
Add the Detergent.
• The appropriate quantity of Detergent marked next to the
Water of Water• Detergent.
• When the lid is open the machine will not operate, and an alarm
signal will remind you to close the lid.
NOTE
• Finishing time can be delayed from 3 ∼ 18 hours. Delaying 3 ∼ 12 hours can be done in 1 hour time
intervals and from 12 ∼ 18 hours in 2 hour time intervals.
• If the lid is open, the machine will not work, a chime will sound repeatedly to remind you to close the lid.
• To select washing time, rinsing times, spinning time, water level, hot/cold or wash power manually, press
the Delay Start (Reservation) button and select the desired option. Then press the START/PAUSE button.
• When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the
spinning program. (The laundry will be wrinkled if left for a long time after spinning.)
5
Add the laundry and press the START/PAUSE button.
• When you press the START/PAUSE button the light will blink.
6
Close the lid.
• Water will then be let in again 2 minutes after the wash has
commenced to supplement the water that the laundry has
absorbed.
Finish • The washing will be finished according to the delayed time.