Owner's Manual

26
Installation
NOTE
If the washing is installed on a uneven, weak or tiled floor causing excessive vibration, spin failure or “ ”
error can happen to it.
It must be placed on a firm and level floor to prevent spin failure.
P
lacing and Leveling
Please ensure that transit restraint has been removed before operating your machine.
1
Place the machine on a flat and firm surface which allows proper clearance.
We suggest a minimum clearance of 2 cm to the right side
and left sides of the machine for ease of installation. At the
rear, a minimum clearance of 10 cm is suggested.
2
Check that the machine is level
Open the lid and look from above to see if it is same as shown.
3
Leveling the machine
Lift the front of the washing machine and twist the Adjustable
Leg until washing is placed evenly.
Top view of machine
Adjustable legs
* Installing the Anti-Rat Cover (option) Insert the anti-rat cover to be firmly fixed from the back or front
of washing machine and screw it.
SETTING SCREW
Anti-Rat
Cover
FRONT
Caution
If the power is supplied from a cord extension or generator, the cord extension set or electrical portable
outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.