Owner's Manual

29
Installation
1
Attach the water supply hose to the tap.
Push the water supply hose up so that the rubber
packing within the hose can adhere completely to
the tap
Water tap
Rubber Packing
Water Supply Hose
2
Connect the water supply hose to tap.
Connect the water supply hose to the tap and then
tighten it by screwing it to the right.
3
Check water leakage.
After connecting the hose, open the tap to check
for any water leakage.
Screw Type
Connecting Water Supply Hose to the machine
• Connect the water supply hose to inlet valve of the
washing machine, and then lock it by turning the hose
connecting part.
• Check to see if there is rubber seal inside the connector.
Hose connector
Rubber seal