Washing Machine OWNER'S MANUAL MODEL : WF-T8018TP(H) Please read this manual carefully before operating your Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover information to your dealer when you and require quote this service. set.
P roduct Features "Turbo Drum" washer doesn't operate while the lid is open. If the lid is open the wash, rinse or spin cycles, the operation stops for safety. during "For better wash of lots of laundry, putting more heavily-soiled laundry first and using 300g detergent is recommended, but if too much foam is made, decrease the amount of detergent.
C ontents READ THIS MANUAL Inside you will find many helpful hints on how to use and maintain your washer properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your washer. You will find many answers to common problems in the Troubleshooting section. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.
S afety information WARNING! Read and follow this Introducin safety information carefully. safety, the information in this manual must be followed to minimize the risk of fire explosion, electric shock, or to prevent property damage, personal injury, or loss of life. For your or Save these instructions. ? WATER HEATER Under certain conditions hydrogen gas may be produced in a water heater that has not been used for two weeks or more. Hydrogen gas can be explosive under these circumstances.
I dentification of Parts Body POWDER DETERGENT BOX FOR DELAYED * WASHING () WATER SUPPLY HOSE Make sure the water does not leak. * SOFTENER INLET Softner will automatically flow into the tub. * () POWER PLUG If the supply cord is damaged, it must be replaced by the INLET HOLE FOR BLEACH manufacturer () or its service agents or similarly qualified person in order to avoid a hazard.
Function Information Our machine provides various washing methods which suits various conditions and types of laundry. Introducin Different types of laundry washing Fuzzy(Normal) Wash Program for everyday washing e.g. sheets, towels, T-shirts. (refer to page4) Use this Jean Wash Use this Program for heavily soiled durable garments e.g. overalls, jeans. heavy clothes or those which are excessively dirty like jeans or working uniforms can be washed.
Preparation Before Washing BeforStaingWsh Care Labels * care label on your clothes. This will tell you about the fabric content of your garment and how it should be washed. Look for a Sort clothes into loads that can be washed with the same wash cycle, water temperature and spin speed. Sorting results, different fabrics need to be washed in different ways.
U BeforStaingWsh Using se of Water, Detergent, Bleach and Softener Water Amount of Water Level ? ? This machine detects the will be shown ? When the water level is Water same T water level is indicated temperature ? The machine sets the ? You appropriate temperature automatically according to the wash program change by pressing the WATER TEMP button. (refer to p12) The temperature of the water impacts the effectiveness of all laundry additives and therefore, the cleaning .
BeforStaingWsh Using Detergent How much detergent When you select a wash program the water level and the amount of detergent (to be used) will be shown on the control panel. The amount of a cup in the diagram is about 40g for concentrated detergent. The correct amount of detergent will vary depending on the amount of soil in your clothes and work cloches may need more detergent, while bath towels usually need less.).
U BeforStaingWsh se of Water, Bleach and Softener Detergent, Fabric Softener Using ? ? Dilute fabric softener with water. Undiluted fabric softener may result in spots that look like oil stains. dispenser ( ) Measure and add the recommended amount of fabric softener into the compartment marked with this smbol( Fabric softener is Follow manufacturer's direction. automatically dispensed in the final rinse. Do not overfill. The dispenser hold Never add more than 35mL. max ). or 35mL.
Special Guide for Stain Removal WARNING Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death. To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below: ? ? ? ? ? ? Read and comply with all instructions on stain removal products.
F unction of each Button BeforStaingWsh Water Temp. Selector Water level button (indication of detergent amount) Used to select proper water temperature of washing water. [Warm Cold ? Cold Hot light on)] Warm (Hot and adjust the water level as required. The appropriate detergent is shown next to the water level in the WATER-DETERGENT diagram Use to amount of mode repeats. ? Water level is automatically selected for fuzzy (normal) program.
Time Start/ Pause button left, Delay Start (Reservation), Alarm indication ? ? Time left - During operation, the remaining time is indicated. ? Delay Start indication (Reservation) When delay start (reservation) program is selected, it indicates the finishing time. (RES.=DELAY) ? Alarm indication -When - indicate the abnormality. ? ? an error For occurs, example, an error message appears to indicates that the lid is 3 .
Washing Programs WashingProm AUTO OFF Add the Washing Programs Add the detergent laundry Fuzzy Washing (Normal Wash) 1 2 4 Used for normal loads, this mode automatically selects the most appropriate conditions and completes the sequence in one operation. The built-in sensor Add the appropriate quantity of detergent as indicated by the water level next to WATERDETERGENT.
Close the lid 3 Caution & Note Finish 6 5 If water is already in the tub, or putting wet laundry into the tub before starting will increase the water level. The pulsator rotates for 8 seconds to detect the laundry load. Then the water level and the amount of detergent to be used will be shown and water will be supplied. 4 4 Water will be supplied for 2 minutes after the start of the wash to supplement the water the laundry has absorbed.
D AditonalFucOps elay Start (Reservation) Wash Delay Start (Reservation) Wash is used to delay the finishing time of the The hours to be delayed can be set by the user accordingly. The time on the display is the finishing time not the start time. operation. , 1 Press the POWER button to turn power on. AUTO OFF 2 Press the PROGRAM button to select the washing program. Select the program for laundry on the Control panel. This program will not work in Wool Program.
Option Washing When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually 1 Press the AUTO OFF (Power) button to turn power on. AUTO OFF 2 Wash Wash+Rinse , , Rinse , Rinse+Spin , Press the PROCESS button until above (refer to p13) light is on. Spin only options Option Washing When you want to only drain, wait until the water in the washing tub drains completely and then, turn off the power.
O AditonalFucOps ther Useful Functions Child Lock Function If you want to lock all the child lock keys to prevent settings from being changed by a child, you can use the option. How to Lock 1 Press the POWER button. AUTO OFF 2 Turn Power Press the START/PAUSE button to start washing. After all 3 on. washing conditions are set Press both the PROCESS button and the PROGRAM button according to the manual. simultaneously.
and Placing Please ensure Leveling that transit restraint has been removed before operating your machine. Instal ion 1 Place the machine on a flat and firm surface which allows proper clearance. We suggest a minimum clearance of 2 cm to the right side and left sides of the machine for ease of than 10 cm more installation. At the rear, more a minimum clearance of 10 cm is than 2cm suggested.
C Instal ion onnecting Supply Hose Before connecting the Water Supply Hose to the water tap, check the hose type and then choose the correct instruction here under. Note that the Water Supply Hose supplied may vary from country to country, Make sure to connect the blue inlet hose to the cold water tap, and the orange inlet hose to the hot water tap. Connecting Water Normal 1 Water Supply Hose to water Type (Normal tap without thread & the Untighten tap screw type inlet hose.
Normal 1 Type Separate (Normal tap without thread & one touch type inlet hose.) Middle connector from Water Supply Separate Middle connector from the Water Supply Hose by pulling the Pressing Rod and the Pressing Handle that is attached to the Water Supply Hose. Hose Middle Fixed Sticker connector Pressing Handle Pressing Rod Water 2 Supply Hose Loosen the fixed nuts to connect the connector to the tap Untighten the screw of the connector so that the tap can be placed in the middle.
C Instal ion Screw 1 Water onnecting Supply Hose Type Attach the water supply hose to the tap. Push the water supply hose up so that the rubber packing within the hose can adhere completely to the tap. Water tap Rubber Water 2 Connect the water supply Packing Supply hose to the tap. Connect the water tighten it by 3 supply hose to the tap and then screwing it to the right. Check water leakage. After connecting the hose, open the tap for any water leakage.
Connecting Drain Hose Before connecting Drain Hose, check your Drain Hose model and choose the correct instructions. Instal ion Model Pump 1 Fit the end of the drain hose to the outlet of the 2 Put the other end of the drain hose over the standpipe or drain pump and tighten the clamp. wash tub. Hose Guide Within 50 mm 0.9~1.2m Drain Hose Note To prevent siphoning, the drain hose should not extend more than 50 mm from the end of the hose The discharge height should be approximately 0.9 1.
G CarendMitc rounding Method Earth wire should be connected. If the earth wire is not connected, there is caused by the current leakage possible a danger of electric shock . Grounding Method with Ground insert space Terminal If the AC current outlet has ground terminal, then separate grounding required. Note that AC outlet power configurations may differ from country a is not to Ground Terminal country Outlet with Other Grounding Method Burying Copper bury it terminal.
Cleaning Cold water ? washing If you always use cold water, we recommend that a warm or hot wash be used intervals e.g. every 5th wash should be at least a warm one at a regular When you have finished ? ? Turn off taps to prevent the chance of flooding should Always unplug the power cord after use. When water supply into the tub is not clean filter in the inlet valve occasionally. (The figure of power cord and water or the filter is a hose burst.
C CarendMitc and Maintenance leaning When there is a fear of ? ? ? freezing Close the water taps and remove the Water Supply Hose. Remove the water which remains in the water supply. Lower the drain hose and drain the water in the bowl and the drain hose by spinning. If frozen ? ? ? supply hose, and immerse it in hot water at approx.. 40˚C. Pour approx.. 2 liters of hot water at approx.. 40˚C, into the bowl and let it stand for 10 minutes.
Common washing problems Many washing problems involve poor soil & stain removal, residues of lint and damage. For satisfactory washing results, follow these scum, and fabric instructions. WASH PROBLEM Problems Poor soil removal Solutions & Preventive Measures Possible Causes ? Not ? Wash water enough detergent ? ? the washer ? Overloading ? Incorrect wash Use ? Reduce load size. ? Wash with Jean Do not soil type.
T roubleshooting Troubleshting Before calling for service, Symptom Water Supply Failure check the Error problem against Message Check up . . . . . . Drainage Failure the list bellows. Is the water tap shut off? Is the water supply cut off ? Is the tap or water supply hose frozen Is the water pressure low or is the filter of the inlet valve clogged with impurities? Is the Hot hose connected to cold? Is the Cold hose connected to Hot? . Is the drain hose .
erms TWhat of Warranty Is Not Covered: ? ? ? If the product is connected to any voltage other than that shown on the rating plate. If the fault is caused by accident, neglect, misuse or Act of God. If the fault is caused by factors other than normal domestic use or use in accordance with the owner's manual. ? ? ? ? ? ? ? ? ? Provide instruction change the set-up of the product. If the fault is caused by pests for example, rats or cockroaches etc..
Specification Specifaton H D W Model WF-T8018TP(H) Size 590(W)x606(D)x958(H) Water tab pressure 30 -800 kPa In our to the (0.3 -8 kgf /cm2) continuing effort to improve the quality of our appliances, appliance without revising this manual.
P/No.
