built-in OWNER’S MANUAL Please read this manual carefully before operating your set and retain it for future reference. MODEL WK7 www.lg.com MFL70521717 Copyright © 2018 LG Electronics Inc.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started 3 NOTICE: For safety marking information including product identification and supply ratings, please refer to the main label on the bottom or the other surface of the product. Check the specification page of this owner’s manual to be certain of the current requirements. CAUTION when using this product in environments of low humidity Do not overload wall outlets.
Getting Started Symbols ~ 1 0 Refers to alternating current (AC). Refers to direct current (DC). Getting Started Refers to class II equipment. 1 Refers to stand-by. ! Refers to “ON” (power). Refers to dangerous voltage.
Table of Contents 5 Table of Contents 1 1 Getting Started 4 Troubleshooting 2 6 6 7 8 Safety Information Unique features Introduction Front Rear 25 25 26 26 Troubleshooting – General – Network – Application 2 Connecting 5 Appendix 9 9 9 10 10 13 Network connection Setting up the Speaker – Connecting the AC Adapter – Installing “Google Home” App – Launch the app to connect Wi-Fi – Reference site for Google Assistant Help 27 27 28 29 Trademarks and Licenses Handling the Unit OPEN SOURCE Spec
1 Getting Started Unique features Introduction BLUETOOTH® Symbol used in this manual Getting Started Listen to music stored on your Bluetooth device. "Google Home" application You can enjoy various functions of this speaker by connecting to network and your smart device with "Google Home" app. The speaker and your smart device must be connected to the same network. Visit or "Google Play” or “App Store” to search for "Google Home" app.
Getting Started 7 Front a 1 Getting Started b c g d e f ,,Note a Plays, pauses or skip playback. b Function LED Changes LED status in according function. Bluetooth: Blue / Wi-Fi: White (Page 14) (Function) c Changes Wi-Fi or Bluetooth. (Page 15) d -- Use in instead of saying "Hey Google" by long pressing the (Page 16) -- Plays or pauses a music and stops the Google Assistant feedback. (Page 15) e , Adjusts the volume.
Getting Started Rear 1 Getting Started a b a (Microphone off) button Enables or disables the Google Assistant Microphone (voice recognition) (Page 23) c b DC IN (AC adapter input) c RESET Initialize information of existing connection.
Connecting Network connection Setting up the Speaker You can enjoy various functions of this speaker by connecting to network and your smart device with "Google Home" app. Connecting the AC Adapter Choose the connection method considering your network environment. 9 Connect the speaker to the power supply with the supplied AC adapter. 1. Connect the supplied AC power cord to DC IN adapter input. 2. Plug the AC power cord into an AC outlet.
Connecting Installing “Google Home” App Launch the app to connect Wi-Fi The "Google Home" app allows you to use various functions of this speaker through your smart device: There are a ways to install “Google Home” app onto your Smart device. Make sure your smart device Wi-Fi feature is turned on. Once a connecting operation is performed, it does not need to be performed again. Requirements before setup 2 Connecting yy A wireless router must be connected to the internet.
Connecting 11 c g 2 h e i f i Connecting d
Connecting j 3. When the speaker is properly connected to Wi-Fi, the Function LED will be solid white with sound. 2 Connecting k ,,Note yy If the app is already installed, this speaker is display in main screen of the app. yy Depending on wireless router status, it might not work well Wi-Fi connection. yy It is recommended that you use WiFi Group Play with less than 5 speakers. l yy For more information (Set up, Usage, Help etc.), research “Google Assistant Help” or visit the web site.
Connecting 13 Reference site for Google Assistant Help https://support.google.com/assistant/answer/7538816 Listen to music https://support.google.com/assistant/answer/7539710 Play music on your TV or speakers https://support.google.com/assistant/answer/7539867 Play TV shows & movies https://support.google.com/assistant/answer/7539991 Control smart home devices https://support.google.com/assistant/answer/7540703 Create a shopping list https://support.google.
Operating Basic Operations Function LED status 3 LED Status Description Operating LED blinks in white. Ready for Wi-Fi connection. LED turns on white with the sound. Wi-Fi connection is success. LED blinks in Blue with the sound. Searching for Bluetooth device. LED turns on Blue with the sound. Bluetooth device is connected. ,,Note When operation of speaker is completed, Function LED turns off after 3 seconds.
Operating 15 Simple Operation Guide Function How to Status Function LED turns on blue with the sound. Play / Pause Tap or Plays or pause a song. Forward skip Tap X2 Plays next song. Backward skip Tap X3 Plays previous song. Wi-Fi / Bluetooth Tap Volume control Tap The Google Assistant Changes function and Function LED's color. (Bluetooth: Blue / Wi-Fi: White) or Long press (0~15 level). 2 seconds. Tap Enable/ Disable Voice recognition Press (Micropone off) on rear of speaker.
Operating How to use the Google Assistant Talk to the Google Assistant Google Assistant LED status You can use a variety of voice commands to control this speaker with the Google Assistant. Try to say a voice command to the speaker. The speaker will activate the Google assistant and perform your voice command. Hey, Google. Set the alarm at 4 PM. There, your alarm is set for 4 PM. 3 Operating LED ,,Note Status Description All four LEDs are on. Ready to listen to your voice command.
Operating 17 Comfortable Function Voice command With the Google Assistant built in, you can control compatible smart home devices such as TV’s, lights, switches, plugs, thermostats and more by simply using your voice. 1. Time "What time is it?", "What time is it now?", What time is it in Spain?" 2. Weather "What's the weather?", "What's the weather this weekend?", "What's the weather in Paris?", "Will it rain tomorrow?" 3. Plan "Tell me about my day.
Operating ,,Note yy After connecting to Wi-Fi, this function is available to use. If Function LED (White) blinks, the speaker is not connected to WiFi. Follow the “Installing “Google Home” App” and try again. (page 10-13) yy If the Google Assistant LED is solid amber, the microphone is off. In that case, the Google Assistant is not available to receive your comment. Press the button on back of the speaker.
Operating 19 LG Wi-Fi Speaker The "LG Wi-Fi Speaker"app is provided by LG Electronics. This app allows you to use various functions of this speaker through your smart device: Requirements before using You should connect to Wi-Fi by using "Google Home" app prior to use this app. (Page 10-13) ,,Note Through Apple "Google Play" or "App Store" 1. Tap the “Google Play Store” icon or “App Store” icon on your smart device. 2. Type in "LG Wi-Fi Speaker" in the search bar and tap "Search". 3.
Operating BLUETOOTH connection lock Sound effect You can limit Bluetooth connection to only Bluetooth function to prevent unintended Bluetooth connection. This system has a number of pre-set surround sound fields. You can select a desired sound effect by using "LG Wi-Fi Speaker" app. 1. Install the "LG Wi-Fi speaker" app. Follow the "LG Wi-Fi Speaker" (page 19) 2. Follow these instructions in order. [ ] [ [My Speakers] [ [ ] [ [Bluetooth connection restriction] 3.
Operating 21 Using BLUETOOTH® technology About BLUETOOTH Bluetooth is wireless communication technology for short range connection. The sound may be interrupted if the connection has interference by some other electronic waves or you connect the Bluetooth in some other room. Pairing your unit and BLUETOOTH device Before you start the pairing procedure, make sure the Bluetooth feature is turned on in to your Bluetooth device. Refer to your Bluetooth device’s user guide.
Operating 4. Select "Speaker name (App setup)". Speaker name ,,Note yy App setup means that you set the name in the "Google Home" app. For example, if the speaker name is set to Smart speaker in the "Google Home" app, you will see “ Smart speaker” on your Bluetooth device. 3 Operating yy You may check and edit the speaker name on "Google Home" app (Page 24) yy Depending on the Bluetooth device type, some device have a different pairing way. Enter the PIN code (0000) as needed. 5.
Operating 23 ,,Note yy Bluetooth connection will be disconnected when you change the Bluetooth function to another function. When you switch to Bluetooth function again, the speaker will automatically reconnect the Bluetooth device. Some Bluetooth devices may not be connected in automatic. yy Some of PC may not be automatically connected to Bluetooth.
Operating Edit speaker name You can check and edit the speaker name on the "Google Home" app, follow these instructions. 3. The speaker has completed resetting when Function LED blinks slowly with sound. [ ] [ [ ] [ [Settings] [ [Device info] [ [Name] Resetting To initialize information of existing connection, follow these instructions. 1. Press and hold the RESET button for 5 seconds. The Function LED will be filled when RESET is pressed. 3 Operating 2.
Troubleshooting 25 Troubleshooting General Problem Cause & Correction No Power yy The power cord is unplugged. Plug in the power cord. yy Check whether electricity failed. Check the condition by operating other electronic devices. yy The unit or your smart device’s volume is set to minimum. Check and adjust the volume of the speaker or your device’s volume. No sound or sound distortion. yy When you use an external device at high volume, the sound quality may be deteriorated.
Troubleshooting Network Symptoms Cause & Solution Cannot connect the speaker to your home network. The wireless communication may be interrupted from household devices that are using radio frequencies. Move the speaker away from them. Media servers are not displayed on the device list. yy The firewall or anti-virus software on your media server is running. Turn off the firewall or anti-virus software running on your media server. The application doesn’t work properly.
Appendix 27 Trademarks and Licenses Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners.
Appendix OPEN SOURCE OPEN SOURCE SOFTWARE NOTICE INFORMATION You can find “Open Source Software Notice” at the"LG Wi-Fi Speaker" app or "Google Home" app To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit LGE OPEN SOURCE http://opensource.lge.com. 1. Launch "LG Wi-Fi Speaker" app on your smart device. 2. Follow these instructions in order. [ ] [ [ Settings] 3.
Appendix 29 Specifications Speaker Power consumption Refer to main label. Networked standby : 4.7 W AC adapter yy yy yy yy Model: LCAP16B-E Manufacturer: Lien Chang Electronic Enterprise Co., Ltd. Input: 100-240 V~ 50-60 Hz Output: 19 V 0 2.1 A Dimensions (W x H x D) Approx. 135 mm X 210.7 mm X 135 mm Operating temperature 5 °C to 35 °C Operating humidity 5 % to 60 % yy Design and specifications are subject to change without notice.
OWNER’S MANUAL LG Wi-Fi Speaker www.lg.
Table of Contents 2 Table of Contents 1 Getting Started 3 3 ”LG Wi-Fi Speaker” – Installing “LG Wi-Fi Speaker” App 2 Operating 4 Enjoying the Music with “LG Wi-Fi Speaker” app – Overview of the side menu – Overview of [My Speakers] – Playing a song – Managing a song – Overview of Playback Settings – Settings of the connected speaker – Settings of “LG Wi-Fi Speaker” app 4 5 5 6 7 9 9 11 1 2
3 Getting Started ”LG Wi-Fi Speaker” 1 Getting Started The “LG Wi-Fi Speaker”app is provided by LG Electronics. This app allows you to use various functions of this speaker through your smart device: Requirements before using You should connect Wi-fi by using “Google Home” app prior to use this app. ,,Note "LG Wi-Fi Speaker" app will be available in version of the software as follow; Android OS : Ver 5.
Operating Enjoying the Music with “LG Wi-Fi Speaker” app With “LG Wi-Fi Speaker” app, you can play music in your smart device. 4 Overview of the side menu 1. Launch “LG Wi-Fi Speaker” app on your smart device. [My Speakers] appears. 2. Tap [ ] button. ,,Note Some of the content in this part may differ from “LG Wi-Fi Speaker” app depending on the application’s version. 2 Operating 3. Side menu appears. a [My Speakers] – Displays the connected speaker.
5 Operating Overview of [My Speakers] Playing a song 1. Select [My Phone] or [Music Server] on the side menu. 2 Operating a [ ] – Connect additional speakers. b [ ] – Selects a function of the connected speaker. c [ ] – Set up the connected speaker settings. (Page 9) d [ ] – Adjust volume level of the connected speaker. [Status] – Shows state of the connected e speaker. 2. You can see songs on your smart device or music server. Select a song to play.
Operating Managing a song Using Playlist On the song list of [My Phone] or [Music Server], tap [ ] of the desired song. The pull down menu appears. You can enjoy music to suit your taste by making Playlist. 6 1. On the song list of [My Phone] or [Music Server], tap [ ] of the desired song and [Add to playlist]. 2 Operating a [Play next] – Selects music to play next. 2. [Add to playlist] window appears. b [Add to queue] – Adds to queue list. c [Add to playlist] – Adds to a desired playlist.
Operating 7 Overview of Playback Selecting Sound effect You can confirm and adjust various information on the playback screen. The app provides 4 sound effects (Clear Vocal+Enhanced Bass, Clear Vocal, Enhanced Bass or Standard). You can select a desired sound mode by tapping [ ]. The displayed items for the equalizer may be different depending on the connected speaker, sound sources and effects. 1. During playback, tap [ ].
Operating ,,Note Sound effect mode This system has a number of pre-set surround sound fields. You can select a desired sound effect by using “LG Wi-Fi Speaker” app. Status Function Description You can enjoy Clear Vocal and Enhanced Bass at the same time. You can enjoy Wide sound field and rich bass with emphasis the bass and warmth of the music. Enhanced Bass Enhanced Bass is more effective for music with bass. Yon can enjoy Highfidelity sound with improved the vocal clarity of every lyric.
9 Operating Settings Settings of the connected speaker With “LG Wi-Fi Speaker” app, you can set the connected speaker in your smart device. You can set up setting of the connected speaker. ,,Note 2 On [My Speakers] screen, select [ ] to set up the connected speaker settings. Some of the content in this part may differ from “LG Wi-Fi Speaker” app depending on the application’s version. Operating ,,Note You cannot see some menu depending on the connected device.
Operating 10 Settings of the connected speaker appear. [Sound Effect] - Selects a sound effect mode a (Clear Vocal+Enhanced Bass, Clear Vocal, Enhanced Bass or Standard). (Page 8) [Bluetooth connection restriction] – b It enables you to connect Bluetooth device only on Bluetooth. [Reset settings] – Resets the speaker settings c (Volume, Sound effect, Function, Bluetooth setting). e [IP Info.] - Shows the IP address of the speaker.
11 Operating Settings of “LG Wi-Fi Speaker” app [Chromecast] Menu Select [Settings] on the side menu. 2 Operating a Settings of “LG Wi-Fi Speaker” app appear. [Learn how to cast] - Shows how to use Chromecast. [Cast Groups] - Select [Learn about Cast b Groups] or [How to cast to a group] to show the selected information. [Chromecast built-in open legal documents] - Select [Google Terms of Service], [Google c Privacy Policy] or [Open source licenses] to show the selected information.
