Owner's Manual

OPERATION 23
Cycle Guide
Turn the knob or press the button to select the desired cycle. When you select a wash cycle, the light for the
corresponding wash cycle will turn on.
NOTE
• Whenever load weights are mentioned, assume 1 lb (0.45 kg) = 1 thick bath towel (dry).
• Temperature indicator lights up when one of Tap Cold, Cold, Warm, Hot or Extra Hot is
selected.
• Spin indicator lights up when one of No Spin, Low, Medium, High or Extra High is selected.
Cycle
Normal
Description
Use to wash all normal items such as cotton, linen, shirts, jeans or mixed loads, except delicate fabrics
such as wool or silk.
• Pressing the Start/Pause button without selecting a cycle will cause the Normal cycle to begin
immediately, using the default settings.
Wash Temp.
Default: Warm
Available: All
Spin Speed
Default: High
Available: All
Soil Level
Default: Normal
Available: All
Cycle
Heavy Duty
Description
Suitable for washing heavily soiled laundry, such as cotton fabrics, using more powerful wash motions.
• When washing large loads, there will be brief periods of 2 minutes or more without agitation.
These soak periods are part of the cycle’s design, and are normal.
Wash Temp.
Default: Warm
Available: All
Spin Speed
Default: Extra High
Available: All
Soil Level
Default: Heavy
Available: All
Cycle
Bedding
Description
Suitable for washing blankets or bulky items which have difficulty absorbing water, such as pillows,
blankets, comforters, sheets or pet bedding.
• Do not use this cycle to wash a mixed load of bedding and non-bedding items.
• Do not mix large/bulky items with smaller articles of clothing.
• Do not wash excessively large items. If large/bulky items do not fit easily into the tub, there
may not be enough room for them to move during washing.
Cycle
Bed
ding
Wash Temp.
Default: Warm
Available: Hot, Warm, Cold, Tap Cold