Owner's Manual

OPERATION 27
Downloaded
default: Small Load
#
#
#
Cycle Modifiers
About Modifier Buttons
Each cycle has default settings that are selected
automatically. You may also customize these settings
using the cycle modifier buttons.
• Repeatedly press the button for the desired modifier
until the indicator light for the desired setting is lit.
• The washer automatically adjusts the water level for
the type and size of wash load for best results and
maximum efficiency.
• This is a high-efficiency washer, and the water levels
may be much lower than you expect. This is normal,
and cleaning/rinsing performance will not be
compromised.
• The LED next to the setting lights up when the setting is
selected.
• To protect your garments, not every wash temperature,
spin speed, soil level, or option is available with every
cycle.
• A chime will sound twice and the LED will not light if the
desired setting is not allowed for the selected cycle.
• Follow the fabric care labels on the garment for best
results.
Temp.
Make sure the wash temperature is suitable for the type
of load you are washing.
• Press the Temp. button repeatedly to select the wash
and rinse temperature combination for the selected
cycle.
• All rinses use unheated cold water.
• Cold rinses use less energy. The actual cold rinse
temperature depends on the temperature of the cold
water at the faucet.
• Your washer features a heating element to boost the
hot water temperature for Extra Hot settings. This
provides improved wash performance at normal water
heater settings.
Spin
Higher spin speeds extract more water from clothes,
reducing drying time and saving energy.
• Press the Spin button repeatedly until the desired
speed is selected.
• Some fabrics, such as delicates, require a slower spin
speed.
Soil
Adjusting the soil level setting will modify the cycle times
and/or wash actions.
• Press the Soil button repeatedly until the desired soil
level is selected.
• The Heavy soil setting may increase cycle times. The
Light soil setting may decrease cycle times.
• The LED for the option will light when the option is
selected.
• To protect your garments, not every option is available
with every cycle.
• A chime will sound twice and the LED will not light if the
selected option is not allowed for the selected cycle.