Owner's Manual
Table Of Contents
- WASHING MACHINE
- ENGLISH
- IMPORTANT SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- OPERATION
- SMART FUNCTIONS
- Using LG ThinQ Application
- Smart DiagnosisTM Function
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
TROUBLESHOOTING 43
LE
MOTOR LOCKED
ERROR
A motor error has occurred.
• Allow the washer to stand for 30 minutes and then restart the cycle.
• If the error code is still displayed, call for service.
svd
OVERSUDSING
DETECTION
Oversudsing of detergent
• Do not add more than the manufacturer’s recommended amount of detergent.
• To remove suds, turn the washer off then back on, then run the Rinse+Spin cycle.
• If too many suds are detected during spinning, the washer stops to help prevent leaking.
PF
WATER LEVEL
SENSOR ERROR
Water level is too low or high compared to the load.
• Unplug the washer and wait for 60 minutes. Reconnect power and try again.
• If the error code is still displayed, call for service.
FF
FROZEN ERROR
Inlet hose, drain hose or drain pump is frozen.
• See Care in Cold Climates.
CL
CONTROL LOCK
FUNCTION
The Control Lock function is on to prevent anyone from changing cycles or operating the washer.
• Turn off the Control Lock function in the control panel. See Control Lock under Options and Extra
Functions.
tcL
TUB CLEAN ALARM
It is time to run the Tub Clean cycle.
• This is not an error code. It indicates that the Tub Clean cycle is running or needs to be run to clean the
washer drum.