Owner's Manual

OPERATION 21
• Do not exceed the maximum fill line. Using too much
fabric softener may stain clothes or cause buildup on
fabrics or in the washer.
• Dilute concentrated fabric softeners with warm water.
• Never pour fabric softener directly onto the load or into
the drum.
Control Panel
• Press this button to turn the washer on or off.
• Pressing this button during a cycle will cancel that cycle and any load settings will be lost.
• The door will unlock after a brief pause.
NOTE
• If there is any water remaining in the drum after the washer shuts off, it will drain after a delay. The washer can be
restarted at any time before the drain begins. However, once the water begins to drain, all functions will be suspended
until the water has been completely drained and the washer shuts off.
b Cycle Selector Knob
• Turn this knob to select the desired cycle.
• Once the desired cycle has been selected, the standard presets will appear in the display. These settings can be
adjusted using the Cycle Modifier buttons at any time before starting the cycle.
c Start/Pause Button
• Press this button to start the selected cycle.
• If the washer is running, use this button to pause the cycle without losing the current settings.
NOTE
• If the Start/Pause button is not pressed to start the selected cycle, after a delay the washer automatically turns off and
all cycle settings are lost. Any water remaining in the drum will be drained.
d Cycle Modifier Buttons
• Use these buttons to adjust the wash temperature, spin speed and soil level settings for the selected cycle.
• The current settings are shown in the display.
• Press the button for that option to select other settings.