Owner's Manual

22 OPERATION
e Time and Status Display
f Option and Extra Function Buttons
• These buttons allow you to select additional cycle options. Certain buttons also allow you to activate special
functions by pressing and holding the button for 3 seconds.
Time and Status Display
a Cycle Status Indicators
• These LEDs will blink when a cycle is selected to indicate which stages will run.
• When a cycle is running, the LED for the active stage will blink, and the LEDs for the remaining stages will remain
steady. Once a stage is complete, the LED will turn off. If a cycle is paused, the active stage LED will stop blinking.
b Estimated Time Remaining
• When a cycle is selected, the default time for that cycle is displayed. This time will change as modifiers or options
are selected.
• If the display shows ---, then the time will be displayed after the load sensing has detected the load size.
• The time shown is only an estimate. This time is based on normal operating conditions. Several external factors
(load size, room temperature, incoming water temperature, etc.) can affect the actual time.
NOTE
• Once the Start/Pause button is pressed, the washer will measure the size of the load. The estimated time may change
once the load size has been measured.
• If the Delay Wash function is set, the remaining delay time counts down until the cycle begins.
c AI DD Indicator
• AI DD provides the appropriate drum rotation actions after load sensing is completed.
• This indicator lights up when:
- the Normal cycle is selected and operated, except for when the Heavy soil level is selected.
- the Bright Whites
TM
and Rinse+Spin cycles are selected and operated with any cycle options.
d Door Lock Indicator
• This indicator lights up when the cycle starts and the door is locked.
• The indicator light stays on until the cycle is paused, stopped or has finished.
e Wi-Fi Indicator
• This indicator is lit when the product is connected to a home Wi-Fi network.
f Remote Start Indicator
• This indicator lights up when the Remote Start feature is activated.
Wash Cycles
The wash cycles are designed for specific types of wash loads. Select the cycle that best matches the load contents for
maximum wash performance and fabric care. See Sorting Laundry section for best results, and follow the fabric care
labels on your garments. For a guide to fabric care symbols, see Sorting Laundry section.