Owner's Manual

32
• If desired, add bleach or fabric softener to the
appropriate areas of the dispenser.
2 Press the Power button.
3 Press and hold the Remote Start button for 3
seconds to enable the remote control function.
4 Start a cycle from the LG ThinQ application on your
smartphone.
NOTE
• Once this function is enabled, you can only start a cycle
from the LG ThinQ smartphone application. If the cycle
is not started, the appliance will wait to start the cycle
until it is
SMART FUNCTIONS
turned off remotely from the application or this
function is disabled.
• If the door has been opened, you cannot start a cycle
remotely.
Disabling Remote Start Manually
When the function is activated, press and hold the
Remote Start button for 3 seconds.
Download Cycle
You can download new and specialized cycles that are not
included in the standard cycles on the appliance.
Appliances that have been successfully connected can
download a variety of specialty cycles specific to the
appliance.
Once cycle download is completed in the appliance, the
product keeps the downloaded cycle until a new cycle is
downloaded.
NOTE
• Only one downloaded cycle can be stored on the
appliance at a time.
Wireless LAN Module Specifications
Model
LCW-004 or LCW-007
Frequency Range
2412 - 2462 MHz
Output Power
(Max)
< 30 dBm
FCC Notice
The following notice covers the transmitter module
contained in this product.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
SMART FUNCTIONS
try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
• Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
and
(2) This device must accept any interference
received, including interference that may cause undesired
operation.
Any changes or modifications in construction of this
device which are not expressly approved by the party
responsible for compliance could void the user’s authority
to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
transmitter must not be colocated or operating in
conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a
minimum distance of 20 cm (7.8 inches) between the
antenna and your body. Users must follow the specific
operating instructions for satisfying RF exposure
compliance.