Owner's Manual

38 MAINTENANCE
• Using the washer without the drain filter or with an
incorrectly assembled drain filter may cause leaks or
malfunction of the washer.
1 Turn off the washer, and unplug the power cord.
2 Open the drain pump filter cover.
3 Drain any remaining water.
• Unclip the drain hose and remove the plug from
the drain hose to drain the remaining water.
4 Remove the pump filter.
• Twist the pump filter counterclockwise to remove.
5 Clean the pump filter and opening.
6 Reassemble the plug onto the drain hose and reclip
the drain hose.
7 Insert the drain pump filter.
8 Close the drain pump filter cover.
NOTE
• An OE message blinks on the display when the drain
pump filter is clogged with dirt. Clean the drain pump
filter.
Care in Cold Climates
Storing the Washer
If the washer will not be used for an extended period of
time and is in an area that could be exposed to freezing
temperatures, follow these steps to protect the washer
from damage.
NOTE
• Make sure the drum is empty before following these
steps.
1 Turn off the washer, and unplug the power cord.
2 Turn off the water faucets.