Owner's Manual

MAINTENANCE 39
3 Disconnect the hoses from the water supply. Drain
any water from the hoses.
4 Plug the power cord into a properly grounded
electrical outlet.
5 Add 1 gallon of nontoxic recreational vehicle (RV)
antifreeze to the empty drum and close the door.
• Never use automotive antifreeze.
6 Turn on the washer and press the Spin button.
7 Press the Start/Pause button to start the drain
pump for 1 minute.
• This will expel some of the antifreeze, leaving
enough to protect the washer from damage.
8 Turn off the washer and unplug the power cord.
9 Dry the drum interior with a soft cloth, and close the
door.
10 Store the washer in an upright position.
11 Remove the inserts from the dispenser. Drain any
water in the compartments and let them dry.
12 To remove the antifreeze from the washer after
storage, run the Rinse+Spin cycle using detergent.
• Do not add laundry to this cycle.
When the Water Inlet Hoses Are Frozen
1 Turn off the washer, and unplug the power cord.
2 Turn off the faucets connected to the water inlet
hoses.
3 Pour hot water on the frozen faucets to thaw the
water inlet hoses and remove the water inlet hoses.
4 Immerse the water inlet hoses in hot water to thaw
them.
5 Reconnect the water inlet hoses to the water inlets
of the washer and to the faucets.
• See Connecting the Water Inlet Hoses for details.
6 Turn on the faucets.
7 Press the Power button to turn on the washer.