Owner's Manual

30 OPERATION
Cycle Modier Buttons
Each cycle has default settings that are selected
automatically. You may also customize these settings
using the cycle modier buttons. Press the button
for the desired modier until the indicator light for
the desired setting is lit. The washer automatically
adjusts the water level for the type and size of wash
load for best results and maximum efciency. Due
to the high-efciency nature of this product, water
levels may be much lower than expected. This is
normal and cleaning/rinsing performance will not be
compromised.
Wash Spin
Extra Hot
Extra High
Hot High
Warm Medium
Cold Low
Tap Cold
No Spin
Heavy
Normal
Light
Grid Mode
Remote
High
Low
Off
Temp. Spin Soil Signal
Rinse
Sensing
Temp.
Temp. selects the wash and rinse temperature
combination for the selected cycle. Press the Temp.
button until the indicator light for the desired setting is
lit. All rinses use tap cold water .
Cold rinses use less energy. The actual cold rinse
temperature depends on the temperature of the cold
water at the faucet.
Your washer features a heating element to boost the
hot water temperature for Extra Hot settings. This
provides improved wash performance at normal
water heater settings.
NOTE
• Select the water temperature suitable for the type
of load you are washing. Follow the garment fabric
care labels for best results.
• Warm rinses are regulated at approximately 74 °F
(23 °C).
• Warm rinses leave the clothes dryer than
cold rinses, but will result in increased energy
consumption and greater wrinkling of clothes.
Spin
Higher spin speeds extract more water from clothes,
reducing drying time and saving energy. Press the
Spin button until the desired speed is selected. Some
fabrics, such as delicates, require a slower spin
speed. To protect your clothing, not all spin speeds
are available for all cycles.
• The Spin button also activates the Drain+Spin cycle
to drain the tub and spin clothes; for example, if you
want to remove clothes before the cycle has ended.
To use Drain+Spin, press the Power button, then
press the Spin button repeatedly to select a spin
speed. Press the Start/Pause button to begin.
Soil
Adjusting the soil level setting will modify the cycle
times and/or wash actions. Press the Soil button until
the desired soil level is selected.
NOTE
• This feature needs more time for heavily soiled
loads or less time for lightly soiled loads.
Signal
The washer plays a melody when the wash cycle
is nished. The buttons make a sound each time
a button is pressed. Use this option to adjust the
volume of the melody and button tones.