OWNER’S MANUAL WASHING MACHINE Please read this owner's manual thoroughly before operating and keep it handy for reference at all times. WT7200C* MFL68267016 Ver.122116.03 www.lg.
3 26 7 8 29 32 32 33 17 39
For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death. Your safety and the safety of others is very important. There are many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property damage and/or serious bodily harm or death.
ALWAYS follow the fabric care instructions supplied by the garment manufacturer. Do not place items exposed to cooking oil in your washer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire. Use fabric softeners or products to eliminate static only as recommended by the manufacturer. This washer is not designed for maritime use or for mobile installations such as in RVs, aircraft, etc.
For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death. To reduce the risk of fire, electric shock or injury to persons when using this appliance, follow basic precautions, including the following: Refer to INSTALLATION INSTRUCTIONS for detailed grounding procedures. Installation instructions are packed with the washer for installer’s reference.
For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death. To reduce the risk of fire, electric shock or injury to persons when using this appliance, follow basic precautions, including the following: Unplug the washer before cleaning to avoid the risk of electric shock. Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish.
The inverter motor directly connected to the tub produces less noise and vibration while offering outstanding durability with a longer lifespan. The efficient design provides you with ultra large capacity. The easy to read LED display shows cycle options, setting, cycle status and estimated time remaining. The touch buttons offer more convenience and a premium design aesthetic. The Slam Proof™ lid is a safety device that closes the lid slowly.
The washer is heavy. Two or more people are required when moving and unpacking the washer. Failure to do so may result in damage to property or serious bodily harm. Store and install the washer where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions. Failure to follow this warning can cause serious injury, fire, electric shock, or death. Properly ground the washer to conform with all electric governing codes and ordinances.
3. Unfasten the power cord from the back of the washer. 1. After removing the carton and shipping material, lift the washer off the foam base. Make sure the plastic tub support comes off with the base and is not stuck to the bottom of the washer. If you must lay the washer down to remove the base packaging materials, always protect the side of the washer and lay it carefully on its side. DO NOT lay the washer on its front or back. Adjustable Pliers Carpenter's Level Plastic Tub Support Carton Base 2.
LG recommends the use of LG hoses. Any leaking, property damage, or damage to the washing machine caused by an improper installation or by the use of non-LG hoses is not covered under the terms of the LG warranty and is the sole responsibility of the customer and/or an installer. Water supply pressure must be between 20 psi and 120 psi (138~827 kPa). If the water supply pressure is more than 120 psi, a pressure reducing valve must be installed.
The drain hose should always be properly secured. Failure to properly secure the drain hose can result in flooding and property damage. The drain must be installed in accordance with any applicable local codes and regulations. Make sure that the drain hose is not stretched, pinched, crushed, or kinked. Do not insert the end of the drain hose into the standpipe more than 8 inches (20cm). Doing so can cause siphoning, odors, or improper draining.
The tub of your new washer spins at very high speeds. To minimize vibration, noise, and movement, the floor must be a level, solid surface. the cabinet side meets the top cover. Do not place the level on the top of the lid. Using these surfaces will result in the washer being unlevel. NOTE: Adjust the leveling feet only as far as necessary to level the washer. Extending the leveling feet more than necessary can cause the washer to vibrate.
The washer should be plugged into a 120-VAC, 60Hz grounded 3-prong outlet. Plug in the washer. Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service technician if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a qualified electrician.
Many articles of clothing include a fabric care label. Using the chart below, adjust the cycle and option selections to care for your clothing according to the manufacturer’s recommendations. NOTE: Use the Bedding cycle for large or bulky items such as poly-filled jackets, comforters, pillows, etc. These items may not be as absorbent as other laundry items and should be sorted into a separate wash load for optimal results. Bulky items should be placed as far down in the tub as possible for optimal results.
The automatic dispenser consists of two compartments which hold: Liquid fabric softener. Liquid or powdered detergent for the main wash. The bleach dispenser is a separate compartment at the left front of the tub opening. This compartment holds liquid bleach, which is dispensed automatically at the proper time during the wash cycle. Any liquid remaining in the dispenser at the end of the cycle is water, not bleach. This compartment holds laundry detergent for the main wash cycle.
For proper wash performance, always measure the detergent using the measuring device provided by the detergent manufacturer. 4. If using fabric softener on NORMAL or HEAVY DUTY cycles, press the FABRIC SOFTENER button or select the EXTRA RINSE option. The normal amount of HE detergent needed, for average loads, is less than ½ of the recommended maximum. Use less detergent for soft water, light soil or smaller loads. Never use more than the maximum amount recommended by the detergent manufacturer.
Press to turn the washer ON. Press again to turn the washer OFF. Pressing the POWER button during a cycle will cancel that cycle and any load settings will be lost. The lid will unlock after a brief pause. NOTE: If there is any water remaining in the tub after the washer shuts off, it will drain following 4-minutes delay. The washer can be restarted any time before the drain begins.
The time and status display shows the estimated time remaining and cycle progress. The Lid Lock indicator will illuminate once a cycle has started. The indicator light will stay on until the cycle is paused, stopped or has finished. The indicator blinks during product registration and Wi-Fi setup and illuminates when the appliance is connected to a home Wi-Fi network. These LEDs will illuminate when a cycle is selected to indicate which stages will run.
Sort laundry by fabric type, soil level, color and load size, as needed. Open the lid and load items into the washer. Add High-Efficiency (HE) detergent to the detergent dispenser. If bleach or fabric softener is to be used, add these to the appropriate dispensers. Press the POWER button to turn ON the washer. The lights around the cycle selector knob will illuminate and a chime will sound. Turn the cycle selector knob in either direction to select the desired cycle. The preset Wash Temp.
The cycle guide below shows the default settings, available options and recommended fabric types for each cycle. Allowable modifier adjustments are shown below the default setting for each cycle.
Wash cycles are designed for the best wash performance for each type of load. Select the cycle that best matches the load contents for maximum wash performance and fabric care. Turn the knob to the desired cycle. When you select a wash cycle, the light for the corresponding wash cycle will turn on. See page 19, OPERATING THE WASHER, for more details on operating methods. Use this cycle to wash all normal items, except delicate fabrics such as wool or silk.
Each cycle has default settings that are selected automatically. You may also customize these settings using the cycle modifier buttons. Press the button for the desired modifier until the indicator light for the desired setting is lit. The washer automatically adjusts the water level for the type and size of wash load for best results and maximum efficiency. Due to the high-efficiency nature of this product, water levels may be much lower than expected.
After selecting a cycle, press the SPECIAL CARE button to select additional features for the load. To protect your garments, not every feature is available with every cycle. If the START/PAUSE button is not pressed within 60 minutes to start the cycle, the control will shut off and all settings will be lost. This option provides a 30-minute presoak prior to the start of the selected cycle. Use the SOAK option to presoak garments to help remove difficult spots or stains on fabrics.
Your washing machine features several additional cycle options that customize cycles to meet your individual needs. To use these options, select the desired option AFTER selecting the desired cycle. After selecting the desired cycle and settings, press the cycle option button(s) for the option(s) you would like to add. The button will light when that option is selected. If the selected option is not allowed for the selected cycle, the chime will sound twice to alert you and the LED will not illuminate.
estimated time remaining. The fabric softener is dispensed in the final rinse. Select the Fabric Softener option to optimize the final rinse for fabric softener use. This option will add an extra rinse to the selected cycle. Use this option to help ensure the removal of detergent or bleach residue from fabrics. Liquid fabric softener, if used, is always dispensed in the final rinse. NOTE: You cannot select the Extra Rinse option with the Spin Only option and Tub Clean cycle.
To reduce the risk of fire, electric shock, or injury to persons, read and follow this entire Owner’s Manual, including the Important Safety Instructions, before operating this washer. Unplug the washer before cleaning to avoid the risk of electric shock. Failure to follow this warning can cause serious injury, fire, electric shock, or death. Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish. Proper care of your washer can extend its life.
Detergent and fabric softener may build up in the dispenser drawer. Remove the drawer and inserts and check for build up once or twice a month. 1. Remove the drawer by pulling it straight out until it stops. Lift up on the front of the drawer and pull it completely out. 2. Remove the inserts from the two compartments. Rinse the inserts and the drawer with warm water to remove buildup from laundry products. 3. To clean the drawer opening, use a small, nonmetal brush to clean the recess.
NOTE: message may blink on the display when the water pressure is weak or an inlet filter is clogged with dirt. Clean the inlet filter. If the washer does not fill properly, an error message will show on the display. The inlet valve filter screens could be plugged by hard water scale, sediment in the water supply, or other debris. NOTE: The inlet screens protect the delicate parts of the inlet valve from being damaged by particles that could enter the valves with the water supply.
Communicate with the appliance from a smart phone using the convenient smart features. Search for the LG Smart ThinQ application from the Google Play Store or Apple App Store on a smart phone. Follow instructions to download and install the application. Select the appliance in the application. Select the menu on the upper right side to access settings and features. Run the LG Smart ThinQ application on a smart phone. Create an account and sign in. Select Register. Select Top Load Washer.
This function provides useful information for diagnosing and solving issues with the appliance based on the pattern of use. NOTE You must first register the appliance and connect to a gateway in order to use the Smart Diagnosis function. This function shows how many cycles remain before It is time to run the Tub Clean cycle. NOTE You must first register the appliance and connect to a gateway in order to use the Tub Clean Coach function.
This device complies with Industry Canada’s licenceexempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm (7.
™ Model WT7200C* Description Top-Loading Washer Electrical requirements 120 VAC @ 60 Hz. Max. water pressure 20-120PSI (138~827kPa) Dimensions 27”(W) X 28 3/8”(D) X 44 1/2”(H), 57 1/4” (H with lid open) 68.6cm(W) X 72.1cm(D) X 113cm(H), 145.3cm (H with lid open) Net weight 146.9 lbs (66.5kg) Max. spin speed 950RPM (±50 RPM) Should you experience any problems with your washing machine, it has the capability of transmitting data via your telephone to the Smart Diagnosis Team.
The following sounds may be heard while the washer is operating. They are normal. Lid lock relay when the lid locks and unlocks. Water spraying or circulating during the cycle. Drain pump is pumping water from the washer at times during a cycle. A liquid in the balance ring around the wash basket helps the basket spin smoothly. The washer adapts to the load size and type to add more water to the cycle as needed. The wash load may be unbalanced.
Problem Wrinkling Excessive sudsing Staining Possible Cause Solutions Washer not unloaded promptly. Always remove items from the washer as soon as the cycle is complete. Washer overloaded. The washer can be fully loaded, but the tub should not be tightly packed with items. The lid of the washer should close easily. Hot and cold water inlet hoses are Hot water rinse can set wrinkles in garments. Check the reversed. inlet hose connections.
Problem Washer will not operate Washer not filling properly Possible Cause Solutions Control panel has powered off due This is normal. Press the POWER button to turn the to inactivity. washer on. Washer is unplugged. Make sure cord is plugged securely into a working outlet. Water supply is turned off. Turn both hot and cold faucets fully on. Controls are not set properly. Make sure the cycle was set correctly, close the lid and press the START/PAUSE button.
Problem Washer will not drain water Possible Cause Solutions Kinked drain hose. Ensure that the drain hose is not kinked. Drain located higher than 96 in. Make sure that the drain hose is no higher than 8 ft. above the floor. above the bottom of the washer and is no more than 5 ft. away from the washer. Poor stain removal Proper options not selected. Heavier soils and tougher stains may require extra cleaning power. Select the Soak or Stain Care feature to boost the cleaning power of the selected cycle.
Problem The display shows: The display shows: Possible Cause The lid is not closed properly. Lid lock switch error. Solutions Make sure that the lid is closed properly and press the START/PAUSE button. After starting a cycle, it may take a few moments before the tub begins to turn or spin. The washer will not spin unless the lid is locked. If the lid is closed and the lid lock error message is displayed, call for service. Make sure that the lid is closed properly and press the START/PAUSE button.
Problem The display shows: Possible Cause Foreign objects, such as coins, pins, clips, etc., caught between the wash plate and the inner basket. Water in the washer drains slowly Drain hose is kinked, pinched, or or not at all, or the display shows: clogged Solutions Turn off the washer and then press the Power button. Press the spin speed button without selecting a cycle to drain and spin the load.
WARRANTY: LG Electronics U.S.A., Inc. (“LG”) warrants your LG Washing Machine (“product”) against defect in materials or workmanship under normal household use, during the warranty period set forth below, LG will, at its option, repair or replace the product.
WARRANTY: Should your LG Washer (“Product”) fail due to a defect in material or workmanship under normal home use during the warranty period set forth below, LG Canada will at its option repair or replace the Product upon receipt of proof of original retail purchase. This warranty is valid only to the original retail purchaser of the product and applies only to a Product distributed in Canada by LG Canada or an authorized Canadian distributor thereof.
