User's Manual

22 OPERATION EN
Extra Options and
Functions
You can use the extra options and functions on
some programmes to customize the cycle.
• The extra options and functions can be changed
when the START/PAUSE button is pressed
during operation depending on the selected
programmes, options and functions.
Soil Level
Use this option to select the wash strength.
• 3 levels are selected for Heavy, Normal and
Light.
• If you do not select this option, it will be in the
normal state with the light turned off.
Temp.
Use this option to change water temperature.
• 3 levels are selected for Warm, Hot and Cold.
Water Level
This appliance detects the amount of laundry
automatically, then sets the water level. However,
manually increasing the water level may be
required and recommended to avoid linting and
unbalanced errors when the load is bulky but
lightweight.
• Press Water Level option to adjust water level.
• When you select a wash programme, the water
level will be shown on the control panel.
• When water level is automatically detected, it
may differ depending on the amount of laundry
even though the same water level is indicated on
the control panel.
Wash
Adjusting the wash time setting modifies the cycle
times and/or wash actions.
• Press Wash button until the desired wash time is
selected.
Rinse
Use this option to change the number of rinses.
• Press Rinse button to change the number of
rinses.
• When the Rinse option is selected,
l icon is lit.
• If selecting the maximum number of rinses, then
this option is deactivated.
NOTE
• This option is only available on some
programmes.
Spin
Use this option to change the spin strength. When
you press the START/PAUSE button after selecting
this option, the remaining time is indicated on the
display.
NOTE
• Always keep the laundry amount to 2 kg or less
and make sure to redistribute the laundry
evenly.
Soak
This option can be selected to wash heavily soiled
clothes by soaking them in water for some time to
loosen dirt and grime.
• Press the Wash button until
u and k icons
turn on simultaneously.
Delay
Use this function to delay ending time. The
appliance will start automatically and finish after a
specified time interval.
1 Press the POWER button.
2 Select a washing programme.