User's Manual

23
OPERATION
EN
3
Press the Delay button to set the required
delay ending time.
4
Press the START/PAUSE button.
NOTE
This function is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
laundry and other factors.
Reservation can be made up to 18 hours;
- 1 hour interval up to 3 - 12 hours
- 2 hours interval up to 12 - 18 hours
This function cannot be set for less than 3 hours.
To cancel this function, press Delay button
repeatedly until the reservation is cancelled or
press the POWER button to turn off and on
power.
Child Lock
Use this function to disable the controls. This
function can prevent children from changing
programmes or operating this appliance.
NOTE
Once this function is set, all buttons are locked
except the POWER button.
When the controls are locked,
CL and the
remaining time are alternatively shown on the
display during the wash while the child lock is
engaged.
Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the Temp. and Rinse buttons
simultaneously for 3 seconds to activate this
function.
Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the Temp. and Rinse buttons
simultaneously for 3 seconds to deactivate this
function.
When this function is deactivated, a beeper
will sound and the remaining time for the
current cycle will reappear on the display.