OWNER'S MANUAL WASHING MACHINE Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference. AU ENGLISH WV5-1409W WV5-1408W MFL71445935 Rev.02_091019 www.lg.com Copyright © 2019 LG Electronics Inc.
TABLE OF CONTENTS This manual may contain images or content different from the model you purchased. This manual is subject to revision by the manufacturer. IMPORTANT SAFETY INSTRUCTIONS.........................................3 READ ALL INSTRUCTIONS BEFORE USE......................................................3 WARNING..........................................................................................................3 INSTALLATION.................................................................
IMPORTANT SAFETY INSTRUCTIONS EN READ ALL INSTRUCTIONS BEFORE USE The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below. Safety Messages This symbol is displayed to indicate matters and operations that can cause risk. Read the part with this symbol carefully and follow the instructions in order to avoid risk.
EN Technical Safety •• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. •• Children should be supervised to ensure that they do not play with the appliance.
EN •• This appliance should only be transported by two or more people holding the appliance securely. •• Do not install the appliance in a damp and dusty place. Do not install or store the appliance in any outdoor area, or any area that is subject to weathering conditions such as direct sunlight, wind, or rain or temperatures below freezing. •• Tighten the drain hose to avoid separation. •• Do not plug multiple outlet sockets, an extension power cable or adapter with this appliance.
EN •• Do not repair or replace any part of the appliance. All repairs and servicing must be performed by qualified service personnel unless specifically recommended in this Owner’s Manual. Use only authorized factory parts. •• Do not put animals, such as pets into the appliance. •• Keep the area underneath and around the appliance free of combustible materials such as lint, paper, rags, chemicals, etc. •• Do not leave the appliance door open.
EN •• This appliance must only be used for domestic household purposes and should not be used in mobile applications. •• If there is a gas leakage (isobutane, propane, natural gas, etc.), do not touch the appliance or power plug and ventilate the area immediately. Maintenance •• Securely plug the power plug in the outlet socket after completely removing any moisture and dust. •• Disconnect the appliance from the power supply before cleaning the appliance.
INSTALLATION EN Parts and Specifications NOTE •• Appearance and specifications may change without notice to improve the quality of the appliance.
EN Accessories * This feature is only available on some models.
EN Installation Place Requirements 5 mm Before installing the appliance, check the following information to make sure that the appliance should be installed in a correct place. Installation Location •• Install the appliance on a flat hard floor. (Allowable slope under the appliance: 1°) •• Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials under the appliance.
EN •• If possible, install the appliance in one of the corners of the room, where the floor is more stable. •• Fit the rubber cups to reduce vibration. NOTE •• You can purchase rubber cups (Part No.4620ER4002B) from the LG Electronics service centre. Ventilation •• Make sure that air circulation around the appliance should not be impeded by carpets, rugs, etc. Ambient Temperature •• Do not install the appliance in rooms where freezing temperatures may occur. Frozen hoses may burst under pressure.
EN Removing the Bolt Assemblies 1 Starting with the bottom two transit bolts a, use the spanner (included) to fully loosen all transit bolts by turning them counterclockwise. and vibration. Do not install the washer on any elevated surface, stand or plinth as it can become unstable and fall causing serious injury and damage. Adjusting and Levelling the Feet When installing the appliance, the appliance should be aligned and perfectly level.
EN 3 Secure the levelling feet with the lock nuts b by turning counterclockwise against the bottom of the appliance. 4 Check if all lock nuts at the bottom of the appliance are secured properly. 3 Place the adhesive side a of the anti-slip sheets on the floor. •• The most effective way is to install the antislip sheets under the front feet. If it is difficult to place the sheets under the front feet of the appliance, attach them under the rear feet. 4 Put the appliance on the anti-slip sheets.
EN Checking the Rubber Seal on the Water Inlet Hose Two rubber seals a are supplied with the water inlet hoses. They are used for preventing water leaks. Ensure the washers are in place before connecting the inlet hose. Make sure the connection to taps is sufficiently tight. Do not use any mechanical device to overtighten the inlet hoses. Hand tighten only with the aid of a soft cloth if necessary. After both ends have been connected, open the taps slowly and check for leaks.
EN 4 Push the supply hose vertically upwards so that the rubber seal within the hose can adhere completely to the tap and then tighten it by screwing it to the right. 4 Pull the connector latch plate down, push the supply hose onto the adapter, and release the connector latch plate. Make sure the adapter locks into place. Latch plate Plate Supply hose Connecting One Touch Type Hose to Tap Without Thread 1 Unscrew the adapter ring plate and loose the four fixing screws.
EN Installing the Drain Hose Installing the Drain Hose with the Elbow Bracket The drain hose should not be placed higher than 100 cm above the floor. Water in the appliance may not drain or may drain slowly. •• Securing the drain hose correctly will protect the floor from damage due to water leakage. _ DN •• If the drain hose is too long, do not force it back into the appliance. This will cause abnormal noise. •• When installing the drain hose to a sink, secure it tightly with string.
OPERATION Operation Overview Using the Appliance Before the first wash, select the Cotton wash programme and add a half amount of the detergent. Start the appliance without laundry. This will remove possible residues and water from the drum that may have been left during manufacturing. 1 Sort laundry and load items. •• Sort laundry by fabric type, soil level, colour and load size as needed. Open the door and load items into the appliance. 2 Add detergent or softener.
EN Checking the Clothes Care Label The symbols tell you about the fabric content of your garment and how it should be washed. Symbols on the care labels Symbol Wash / Fabric type •• Normal Wash •• Cotton, Mixed Fabrics •• Easy Care •• Synthetic, Mixed Fabrics •• Special Delicate Wash •• Delicates •• Hand Wash Only •• Wool, Silk •• Close zippers, hooks and strings to make sure that these items do not snag on other clothes.
EN Adding Detergents and Softeners Detergent Dosage •• Detergent should be used according to the instruction of the detergent manufacturer and selected according to type, colour, soiling of the fabric and the washing temperature. Use only detergents that are suitable for Drum (front load) type washers. •• If too many suds occur, reduce the detergent amount. •• If too much detergent is used, too many suds can occur and this will result in poor washing results or cause heavy load to the motor.
EN Adding Detergent Tablet Detergent tablets can also be used when washing as an alternative to powder or liquid. 1 Open the door and put detergent tablets into the drum. •• Do not leave the fabric softener in the detergent drawer for more than 1 day (Fabric softener may harden). •• Softener will automatically be added during the last rinse cycle. •• Do not open the drawer when water is being supplied. •• Solvents (e.g. benzene, etc.) must not be used.
EN Control Panel Control Panel Features a Power Button b •• Press the Power button to turn on or off the appliance. Programme Knob c •• Programmes are available according to the laundry type. •• The lamp will light up to indicate the selected programme. Start/Pause Button d •• This Start/Pause button is used to start the wash cycle or pause the wash cycle. •• If a temporary stop of the wash cycle is needed, press the Start/Pause button.
EN f •• The display shows the settings, estimated remaining time, options, and status messages. When the appliance is turned on, the default settings in the display will illuminate. −− 18:88: When a programme is selected, the default time for that programme is displayed. The default time can be changed according to the selected option. −− k : When the laundry is being washed, this icon is illuminated. −− l : When the laundry is being rinsed after completion of washing programme, this icon is illuminated.
EN Programme Table Washing Programme Programme Cotton Description Provides better performance by combining various drum motions. Use for coloured fast garments (shirts, nightdresses, pajamas, etc.). Proper Temperature 40 °C (Cold to 95 °C) Max. Spin Speed 1400 rpm Programme Cotton Eco Description Provides optimised washing performance for large amounts of laundry with less energy consumption than “Cotton” programme with comparable settings.
EN Programme Allergy Care Description Helps to remove allergens such as house mites, pollen and fur. Proper Temperature 60 °C Max. Spin Speed 1400 rpm Programme Baby Care Description Provides clothes care with gentle motion and better performance by steam. Proper Temperature 60 °C Max. Spin Speed 1000 rpm Programme Delicates Description Suitable for delicate clothes such as under wear, blouse, etc Proper Temperature 20 °C (Cold to 40 °C) Max.
EN Programme Duvet Description For large items such as bed covers, pillows, sofa covers, etc. Use for cotton bedding except special garments (delicates, wool, silk, etc.) with filling: duvets, pillows, blankets, sofa covers with light filling. Proper Temperature Cold (Cold to 40 °C) Max. Spin Speed 1000 rpm Programme Tub Clean Description This is a special function to clean inside of your appliance.
EN Extra Options Programme Intensive Rinse+ Pre Wash Delay End Add Item Cotton # # # # # Cotton Eco # # # # Mixed Fabric # # # # # # Easy Care # # # # Quiet Wash # # # # Allergy Care # # # # Baby Care # # # # Delicates # # # # Hand/Wool # # # # Sportswear # # # # Quick 30 # # # # Duvet # # # # # # # # Tub Clean Download Cycle Extra Options and Functions You can use the extra options and functions to customize the programmes.
EN Delay End Add Item You can set this function so that the appliance starts automatically and finishes after a specified time interval. You can use this option in order to add or remove the laundry after the washing programme has started. 1 Press the Power button. 1 2 Select a washing programme. 3 Press the Add Item button when the LED is turned on. If the LED is not illuminated, the Add item opportunity time has expired and the function will not operate.
EN NOTE •• When you select No, the tub will still rotate for a short time to drain quickly. Beep On/Off q This function can only be selected when the appliance is in operation and a wash is in progress. •• Press and hold the Rinse+ and Pre Wash button simultaneously for 3 seconds to set the this function. NOTE •• Once this function is set, the setting is memorized even after the power is turned off. •• If you want to turn the beeper off, simply repeat this process.
SMART FUNCTIONS Using LG SmartThinQ Application This feature is only available on the model with a or b logo. Before Using LG SmartThinQ 1 Check the distance between the appliance and the wireless router (WLAN network). •• If the distance between the appliance and the wireless router is too far, the signal strength becomes weak. It may take a long time to register or installation may fail. 2 Turn off the Mobile data or Cellular Data on your smartphone.
EN Wi-Fi Function Using the Appliance Remotely Communicate with the appliance from a smartphone using the convenient smart features. Remote Start w Washer Cycle (Remote Start, Download Cycle) Use a smartphone to control your appliance remotely. You can also monitor your cycle operation so you know how much time is left in the cycle. Set or download any preferred cycle and operate by remote control.
EN Standby Power Consumption Standby power consumption 0.5 W Network standby power consumption 2.0 W The period of time after which the power management function, or a similar function, switches the equipment automatically into standby and/or off mode and/or the condition providing networked standby 20 min. RF Radiation Exposure Statement This equipment shall be installed and used at a minimum distance of 20 cm from the human body. 2 x. Ma mm 0 1 3 Press and hold the Temp. button for 3 seconds.
MAINTENANCE EN WARNING •• Unplug the appliance before cleaning to avoid the risk of electric shock. Failure to follow this warning may result in serious injury, fire, electric shock, or death. •• Never use harsh chemicals, abrasive cleaners, or solvents to clean the appliance. They may damage the finish. Cleaning After Every Wash Care After Wash •• After the wash cycle is finished, wipe the door and door seal to remove any moisture. •• Leave the door slightly open to dry the drum.
EN 3 Close the dispenser drawer slowly. 4 Turn on the power, and then select the Tub Clean. •• tcL will be displayed on the display. 5 Press the Start/Pause button to start. 6 After the programme is complete, leave the door open to dry the door opening, gasket, and door glass. CAUTION •• Leave the door open to dry inside of the appliance only if the children are supervised at home.
EN 4 After cleaning the drain pump filter, carefully reinsert the filter and screw the Drain cap back in clockwise carefully to avoid cross threading and leakage. Reinsert the plug back into the drain tube and place the tube into its holder. 5 Close the cover cap. CAUTION •• Be careful when draining, as the water may be hot. •• Run the drum cleaning programme once a month (or more often, as needed) to remove excess detergent and other debris.
TROUBLESHOOTING EN Operation of your appliance can lead to errors and malfunctions. The following tables contain possible causes and notes for resolving an error message or malfunction. It is recommended to read the tables carefully below in order to save your time and money that may cost for calling to LG Electronics service centre. Before Calling for Service Your appliance is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage.
EN Symptoms Possible Cause & Solution dE dE1 dEz dE4 DOOR ERROR Door sensor malfunctions. •• Please call LG Electronics service centre. You can find your local LG Electronics service centre phone number in the warranty card. tE CONTROL ERROR This is a control error. •• Unplug the power plug and call for service. LE MOTOR LOCKED ERROR Over load in motor •• Let the appliance wait for 30 minutes until the motor is cooled down and then, restart the cycle.
EN Symptoms Possible Cause & Solution Thumping sound Wash load may be out of balance. •• Pause the cycle and redistribute the load after the door unlocks. Vibrating noise Package materials are not removed. •• Remove package materials. Wash load may be unevenly distributed in the drum. •• Pause the cycle and redistribute the load after the door unlocks. Not all leveling feet are resting firmly and evenly on the floor. •• See the Leveling the Appliance to adjust the leveling of the appliance.
EN Symptoms Appliance does not operate. Possible Cause & Solution Control needs to be reset. •• Press the Power button, then reselect the desired programme and press the Start/Pause button. Start/Pause was not pressed after a cycle was set. •• Press the Power button, then reselect the desired programme and press the Start/Pause button. The appliance is turned off if the Start/Pause button is not pressed within 15 minutes. Extremely low water pressure.
EN Symptoms Cycle time is longer than usual. Possible Cause & Solution The load is too small. •• Add more items to allow the appliance to balance the loads. Heavy articles are mixed with lighter items. •• Always try to wash articles with similar weight in order to allow the appliance to evenly distribute the weight of the load for spinning. The load is out of balance. •• Manually redistribute the load if articles have become tangled.
EN Symptoms Musty or mildewy odour in appliance Possible Cause & Solution Inside of drum is not cleaned properly. •• Run the Tub Clean function regularly. The drain hose is not properly installed, causing siphoning (water flowing back inside of the appliance). •• When installing the drain hose, make sure that it does not get kinked or blocked. The detergent dispenser drawer is not cleaned regularly. •• Clean the detergent dispenser drawer, especially the top and the bottom of the drawer’s opening.
Memo
Memo
Memo
