Owner's Manual

Using an USB device

You can enjoy media files saved on an USB device by connecting it to the USB

port of the unit. If you want to operate other function, see the DISC playback

section.

ON REMOTE

1 Connect the USB device to the USB port of the unit.

2 Select the function:

FUNCTION

3 Select a ﬁ le you want to play:

U u

4 Start your media playing: B PLAY or

ENTER

5 To stop, press:

x STOP

6 Before disconnecting, you have to change to

any other function:

FUNCTION

Compatible USB Devices

• MP3 Player : Flash type MP3 player.

• USB Flash Drive : Devices that supports USB 2.0 or USB 1.1.

• The USB function of this unit does not support all USB devices.

USB device requirement

• Devices which require additional program installation when you have connected

it to a computer, are not supported.

Look out for the following.

• Do not extract the USB device while in operation.

• For a large capacity USB, it may take longer than a few minute to be searched.

• To prevent data loss, back up all data.

• If you use a USB extension cable or USB hub, the USB device is not recognized.

• Using NTFS file system is not supported. (Only FAT(16/32) file system is

supported.)

• This unit is not supported when the total number of files is 1000 or more.

• External HDD, Card readers, Locked devices, or hard type USB devices are not

supported.

• USB port of the unit cannot be connected to PC.

• The unit can not be used as a storage device.

Listening to music from

your portable player

ON REMOTE

1. Connect the portable player to the PORTABLE

IN connector of the unit.

2. Turn the power on.

POWER

3 Select the PORTABEL function. FUNCTION

4 Turn on the portable player and start it playing -

PORT IN.