Owner's Manual

System Setting16
System Setting
3
LANGUAGE
OSD
Select a language for the Setup menu and then on
screen display.
Disc Audio/Disc Subtitle/Disc Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the disc
was recorded.
[Other]
To select another language, press numeric
buttons and then ENTER (
b
) to enter the
corresponding 4-digit number according to the
language code list on the page 31. If you enter the
wrong language code, press CLEAR.
[O (for Disc Subtitle)]
Turns o Subtitle.
DISPLAY
TV Aspect
Select which screen aspect to use based on the
shape of your TV screen.
[4:3]
Select when a standard 4:3 TV is connected.
[16:9]
Select when a 16:9 wide TV is connected.
Display Mode
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
[Letterbox]
This displays a wide screen picture with black
bands at the top and bottom of the screen.
[Panscan]
This  lls the entire 4:3 screen, cropping the
picture as necessary.
TV Output Select
Select an option according to the TV connection
type.
[RGB]
When your TV is connected with the SCART jack.
[YPbPr]
When your TV is connected with the
COMPONENT VIDEO OUT (PROGRESSIVE
SCAN) jacks on the unit.
If you change TV Output Select to RGB from YPbPr
on the setup menu especially when connecting the
unit in the way of component video connection,
the screen turns black. In that case, connect the
video cable to VIDEO OUT jack and select YPbPr on
the setup menu again.
XB66-ENG.indd 16XB66-ENG.indd 16 11. 06. 23  3:5111. 06. 23  3:51