NEW_W1_XC12U_ENG_MFL38343854 MODEL : XC12 XC12U ENGLISH
There is so much your Hi-Fi system can do Record from a CD or radio to cassette Go to page 8 Lull me to sleep and wake me up Go to page 9 Contents Setting up 3 About Player 4 About Remote control 5 Listening to CDs 6 Connecting your portable USB player - OPTIONAL 6 Listen to cassette tapes 7 Listening to the radio 7 Recording 8 Listening to music from your portable player 8 Setting the Clock 9 Use your player as an alarm clock 9 About MP3/WMA 9 Safety Precaution 10 Troubleshooting 11 Specifications 11 P
ENGLISH Setting up 2 Fit the AM loop aerial to its stand Connect the AM loop aerial to the player. 3 Connect the FM aerial The reception will be at its best when the two loose ends of the aerial are in a straight line and horizontal. 4 Plug the power plug into a wall socket 1 Connect the speaker cables to the player Cables from the left-hand speaker connect to the terminal marked L (left) + (plus) and - (minus).
About Player Z PUSH (CD door) You can use it when inserting or removing CDs. Don't open the door while CD plays back. MODE/RIF This will change the tuner from stereo to mono and usually improve the reception. VOLUME Control the volume when using any function. PHONES (Headphone jack) Connect a headphone plug ( 3.5 mm) into the jack to listen to the sound through headphones. Connecting headphones (not supplied) will switch off the speakers. CLOCK For setting the clock and checking the time.
About Remote control Fall asleep while listening to your player Firstly, start a radio station or music. Press SLEEP one or more times to select delay time between 10 and 90 minutes, after the player will turn off. Turn on or off Search for a folder of MP3/WMA files When a CD containing MP3/WMA files in several folders is being played, press PRESET/FOLDER to select the folder you want to play.
Listening to CDs ON PLAYER 1. Open the CD door: 2. Insert the CD: Label facing up. 3. Close the CD door: The display will show the total number of tracks (files). 4. Select the CD function: 5. Start the CD playing: 6. To stop a CD playing: ON REMOTE Z PUSH The advantage of connecting your portable USB player through the system’s USB port is that the portable device can be controlled from the system. Connect the portable player to the system using a USB cable (not supplied).
Listening to the radio - more you can do Listen to cassette tapes ON PLAYER 1. Open the tape door: 2. Insert the tape: 3. Close the tape door: 4. Select the TAPE function: 5. Start the tape playing: 6. To stop a tape playing: Look for radio stations automatically ON REMOTE xZ Press - TUNING + (or TUN.- /TUN.+ ) for more than 0.5 second. The tuner will scan automatically and stop when it finds a radio station.
Listening to music from your portable player Recording Record from a CD or radio to cassette ON PLAYER 1. Open the tape door: 2. Insert a blank tape: 3. Close the tape door: 4. Select a mode (FM/AM, CD, PORTABLE or USB (OPTIONAL)) in which you want to record: - For CD, press B/[]. 5. Start the Recording: 6. To stop a Recording: ON REMOTE xZ FUNCTION The player can be used to play the music from many types of portable player. FUNCTION z xZ CD Synchronized Recording ON PLAYER 1. Open the tape door: 2.
Use your player as an alarm clock Setting the Clock ON PLAYER 1. Turn the power on: 2. Press for at least 2 seconds: 3. Choose from either: AM 12:00 (for an am and pm display) or 0:00 (for a 24 hour display) 4. Confirm your selection: 5. Select the hours: 6. Press: 7. Select the minutes: 8. Press: 1 /]] CLOCK - TUNING + SET - TUNING + SET - TUNING + SET Press and hold TIMER for two seconds. Each function, TUNER, CD, USB (in the USB supplied models) flashes for two seconds.
Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Troubleshooting Symptom No power. No sound. The unit does not start playback. The remote control does not work properly. Unable to record. Specifications Cause Correction • The power cord is disconnected. • Plug the power cord into the wall outlet securely. • The power of the external source • Switch on the external source equipment is turned off. equipment. • The speaker cable is connected • Set the speaker cable to the corto a wrong position.
P/NO : MFL38343854
