RECEIVER/ DVD PLAYER/ VIDEO CASSETTE RECORDER OWNER'S MANUAL MODEL Unit : XHS-C940 XHS-C940X, Speakers : XHS-C940T, XHS-C940C, (Main XHS-C940W) : PAL CD-R/RW BZ03 Before connecting, operating or adjusting this product, carefully and read this instruction booklet please completely. Internet Address:http://www.lg.
Precautions / Safety notes on Important CAUTION Notes on copyrights: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyright material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER this unit controlling (OR BACK) discs.
Contents Introduction SafetyPrecautions.........................2 2 Important notes on controlling this unit. . . . . . . . . TableofContents..........................3 BeforeUse..............................4-5 PlayableDiscs...........................4 Operation with Audio CD and MP3/WMA Disc PlayinganAudioCDandMP3/WMADisc. NotesonMP3/WMARecordings. . . . . . . . . . . . . . 27-28 .27 .27 . . Pause.............................28 MovingtoanotherTrack...............
Before Use Playable Disc-related terms Discs Title The main film content (8cm/12cmdisc) or Video CD (VCD) (8cm/12cmdisc) Audio CD (8cm/12cmdisc) In addition, this unit play can a DVD-R, DVD±RW, Kodak PICTURE CD and CD-R audio titles, MP3, WMA (DVD only) DVD or or CD-RW that contains JPEG files and SVCD also. or accompanying feature content additional feature content, or music album. Each title is assigned a title reference number enabling you to locate it easily.
Before Use (Cont'd) Precautions Storing After the unit Handling When shipping the unit original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. The When the unit setting picture and sound of a nearby TV or radio may be distorted during playback. In this case, position the unit The away from the TV or radio, removing the disc.
Front Panel and Display Window Forward Skip/Scan, Tape Eject ( ) chapter/track. Fast-Forward Go to NEXT Press and hold for two seconds for DVD OPEN/CLOSE Opens or ) closes the disc tray. Disc Insert To ( Tray Reverse FM/AM between AM and FM bands. change Go to Enter - or radio stations frequency into the tuner. DVD to VCR Copy Button a TUNING a fast search. Rewinds the tape. ( / ) playback temporarily / repeatedly for frame-by-frame playback. Pause press (Radio Mode).
Remote Control OPEN/CLOSE EJECT Open or close Tape Eject. - POWER - VOLUME the disc tray. POWER VCR Switch this unit ON FM/AM SETUP/ i Access or OFF. or AUX AV SOUND MODE - DVD VCR select button - screen AM or as the listening choice bands). Select input TITLE source recording into tape. Enter tuner. a menu selection.
Rear Panel FM ANTENNA CONNECTOR Connect the FM antenna to this terminal. SPEAKER Connectors S-VIDEO OUT EURO AV2 Connect to a Satellite Receiver or (DVD OUT) another Connect to video recorder. AC Power Cord Connect to a a TV with S-Video input. power source. VCR IN+OUT/DVD OUT SPEAKER EURO AV2 DECODER FM S.R(8)F.R(8)W(4)C(8)F.L(8)S.L(8) DVD/VCR OUT AERIAL RF.
Connections Tips Depending Digital on your TV and other equipment Device you wish to connect, there are various ways you could connect OPTICAL OUT the unit. Please refer to the manuals of your TV, Stereo or other devices as necessary to make the System Rear of this unit PREATION (S-Video connection) best connections. Caution SPEAKER -- Make sure this unit is connected Set the TV to the correct video Make one of the AM S-VIDEO OUT following connections, depending existing equipment.
Connections (Continued) Speaker System Connection Connect the speakers using the supplied speaker cords. possible surround sound, adjust the speaker parameters (distance, level, etc.). To obtain the best Notes Be sure to match the cords are speaker cord to the If the the components: + to + and to reversed, the sound will be distorted and will lack base.
Before Operation Glossary for Sound Mini Mode BYPASS Software with multichannel surround audio according Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD and compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of transparent audio(which tional original masters) and results in excepthroughout a true 360 degree sound field.
Before Tuning Operation in a - VCR part video channel on your TV Notes The output frequency of this video recorder (VCR) is set at UHF channel 36. If channel 36 is already used by another TV station, or if the picture is distorted, you can change the transmitter channel of your VCR. Stages 5 8 will show you how to change the output frequency of your VCR. ~ Your TV receives signals from the video recorder (VCR) like another TV station.
Before Setting Operation the clock - VCR part To set the colour system Manually The clock in your VCR controls time and date settings for your VCR. 1 1 Press i. Press 1 or 2 to select TIME DATE. Press i. 2 The main 3 Press 1 or Press 3 or 4 Press OK. menu will appear on the TV screen. 2 to select the SYSTEM and press OK. 4 system used. to select according to the COLOUR HHMMDDMMYY -- :. - - -- -- -- --- .
Before How to Operation VCR part - the main using Tuning menu This VCR menus The can easily be programmed by using displayed on screen. the controlled from the Remote menus are Control Handset. 1 2 If the TV broadcast by pressing menu will appear on the TV section 1 Press i button. screen. Automatically is weak your VCR may signal not detect the necessary information and will not be able to store them correctly.
Before Tuning In certain Operation VCR part - in TV Stations areas Press 2 to select STATION Manually of the country broadcast 5 your signals that you may so name TV station. Press OK. may be too weak for your VCR's automatic tuning process to find or assign TV stations correctly. You must tune in these weaker broadcast stations manually 1 in order for your VCR to store them. Press i.
Before Operation Changing - VCR part the order of TV Stations Deleting After tuning TV stations into your VCR you may wish to change the order in which they are stored without having to retune them! The instructions given on this page will show you how you can simply move them into your desired order. 1 Press i. The main menu will appear on the TV Press 1 or 2 to select the PR SET. Press OK. TV Stations After tuning TV stations into your VCR you may wish to delete a station.
Before General This manual Operation - DVD part Temporary Explanation the basic instructions for gives operating require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, that the indicating operation is not permitted by this unit or is not available On-Screen The TV general playback screen. 1 2 3 Press 3 or can be highlighted. the change The number buttons (e.g.
Before Initial You - DVD General Settings part Menu Settings set your own Personal Preferences on this unit. can Initial 1 Operation (Continued) Select you Language a see Operation Press SETUP. The setup for the setup language menu. This is the menu when you press SETUP. Disc Audio Russian Disc Subtitle English Disc Menu menu appears.
Before 5.1 Operation (Continued) Speaker settings - DVD part Dynamic Range DVD Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 37.) TV R Language a movie 0 dB Size Small Distance 1 ft Vocal Return Speaker Setup Others Set Vocal to On only DVD is The karaoke channels playing.
Before Operation (Continued) - DVD Parental Control Rating Code Country DVD Enter the code of DVD Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain part scenes on the disc. These scenes are were RU Disc Subtitle are Disc Menu Rating Country The Parental Control feature allows country-dependent.
with Operation Playing You will a only tape playback, Shuttle : or still picture press F or G. You can reach the following playback speeds. (-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) Slow motion tape 5 During playing back be able to load and eject video cassettes when your VCR is plugged into the mains. Your VCR may also playback recordings from NTSC To switch off the slow motion and shuttle, press the desired function. tapes (on PAL TV).
Operation with Instant Timer tape Press LP if you wish to record in Recording (ITR) Your VCR allows you to make variety of simple methods: recordings using SP will a Recording (ITR) start recording for a set period of time or until the immediately Your VCR incorporates Long Play (LP) time record up to 180 minutes using Standard Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be quality when as SP.
with Operation tape recording using On Screen Display Timer 6 You may set up to seven timer record events within one month of the current date. Press the numbered buttons to enter the recording start and end times of the programme that you wish to record. Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. You may also select the the start and end times by pressing Note 2 3 PR Insert a video cassette with protection tab into your VCR.
Operation Playing with DVD and Video CD DVD and Video CD a Playback Setup Turn on DVD VCD2.0 the TV and select the video nected to the DVD General Features Note VCD1.1 input source con- player. features may also be available Audio system: Turn on the audio system and select the input source connected to the DVD 1 Moving player. Press OPEN/CLOSE to open the disc Unless stated otherwise, all operations described use the remote control.
with DVD and Video CD Operation General Features Still Picture and VCD2.0 DVD Frame-by-frame playback VCD1.1 1 Press PAUSE/STEP The player Video CDs (continued) will during playback. press REPEAT. playing, on the TV screen. repeat the disc currently playing, press REPEAT 2 To The 2 You can advance the PAUSE/STEP Track/All/Off Repeat 1 To repeat the track currently The Repeat Track icon appears a second time. go into PAUSE mode.
with DVD and Video CD Operation General Features Zoom VCD2.0 DVD (continued) VCD1.1 Checking during playback or still playback to acti- vate the Zoom function. If you press ZOOM repeatedly, the increases up to six times. 2 Use the 1 2 zoomed 3 4 buttons to picture. 3 Press CLEAR to resume normal the the through playback or the contents of DVD Video DVDs may contain menus that allow you to access special features. To use the disc menu, press DISC MENU.
Operation with Audio CD and MP3/WMA Disc Playing an Audio CD and MP3/WMA Disc CD MP3 The DVD Notes MP3/WMA Insert 1 play Recordings a files that have The player can tray. About CD; Audio CD menu appears on the TV go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2 screen a technology. WMA(Windows compression of MP3 WMA JPEG MP3/WMA Disc limited Press 3/4 to select the MP3/WMA then press 2 SELECT/ENTER. 1. as appears on the TV screen.
with Audio and MP3/WMA Disc Operation CD Pause MP3 1 Press PAUSE/STEP 2 To return to WMA Repeat during playback. playback, PAUSE/STEP again. press PLAY To repeat or 1 press CD another Track MP3 WMA Press . twice track. case step back to briefly to the previous of audio CD, to go directly to any track, enter using the numbered buttons (0-9) during playback.
Operation Viewing a with JPEG Disc JPEG disc JPEG Player can play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on the right. This DVD 1 Insert a disc and close the TV menu appears on the screen. JPEG menu appears on the TV > once 1 Press PAUSE/STEP during viewing a picture to the previous file. to or screen.
Programmed Playback Programmed Playback CD VCD2.0 with Audio CD VCD1.1 function enables you to store your favorite tracks from any disc in the player memory. Program Program with Video CD Note On a setup Video CD with PBC, you must set PBC to Off on the menu to use the Program function. See page 19. contain 30 tracks. can Press PROGRAM 1 WMA Programmed Playback and MP3/WMA Disc The MP3 mode to enter the during playback or in Program Edit mode.
Additional On Screen Operation - VCR part Video Doctor Display You may easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode of your VCR will appear on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape. (Self-Diagnosis) This feature informs you that there is a problem with error messages will appear on the TV your VCR. These screen.
Additional Operation Hi-Fi Stereo Sound Your VCR will record In addition it has VCR part - System 2 4:3 or back Wide-Screen programmes programmes as normal. and recording Normal format 16:9: another Hi-Fi VCR. digital AUTO, Wide-Screen and Normal Only playing back and recording Wide-Screen recordings (16:9). for format Your VCR's NICAM to select: as Only for playing back recordings (4:3). and two VHS Hi-Fi stereo audio tracks.
Additional Operation Last Condition DVD This CD DVD part Memory VCD1.1 memorizes the player - user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load a disc that has its OPERATION settings memorized, the latest stop position is automatically recalled. Notes -- -- Settings player stored in memory for use any time.
Special Recording Copying from DVD To VCR Recording from This unit allows you to copy the contents of a DVD to a VHS tape with a press of the COPY/MEMORY button. protected, 1 2 Insert VHS 3 Press DVD a from camcorder. following description, this video recorder will be recording and will be referred to as VCR The other appliance will be used for playback and one B. used for will be referred to as VCR A. Tape so videotape into the VCR deck.
Radio Operation the Radio Stations Presetting preset 30 stations for FM and AM. Before You can ing, make 1 front until the the and TV sure tun- that you have turned down the volume. Press FM/AM panel display on the remote control frequency to the Radio Listening or on the band appears on Preset radio stations in this unit's memory first the radio stations" on the left). (see "Presetting 1 screen.
Radio Tuning 1 2 3 Operation (Continued) into Station a Press FM/AM on the remote control front until the the and TV panel display Press FM/AM front panel on Manually or on the band appears frequency on screen. the remote control or on the to select the desired band. Press TUNING 3 1 or 4 on the front panel or the remote control to tune in or 2 on into a Station press the desired station.
Speaker Settings Make the following settings for the built-in 5.1 channel surround decoder. If you connected Distance lets the Disc Audio R Disc Menu Code Volume Size Aspect Menu R to your unit, setting the know how far the sound has listening point. This allows speaker to reach the listener at 30.48 cm) the sound from each Front L Rating Country speakers speakers to travel to reach your set Disc Subtitle TV Distance time.
Troubleshooting Check the following guide for the possible cause VCR do not or work properly. a before problem contacting service. Cause Symptom DVD of DVD or Correction VCR button is not switched Refer to page 2. properly. No power. The power cord is disconnected. Plug the power securely. The power is on, but the DVD player does not work. No disc is inserted. Insert a disc. (Check that the DVD or, audio CD indicator in the display window is lit.
Language Code Enter the (See appropriate 18).
Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 20).
Specification General Power requirements consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity AC 200-240V, 50/60 Hz Power 74W Timer 24 hours RF Modulator UHF 22-68 430 X 97.5 X 360 6.3 (w/h/d) mm kg 5˚C to 35˚C (41˚F to 95˚F) REF NC 5%to90% display tape (Adjustable) System Semiconductor laser, wavelength 650 nm Double azimuth 4 heads, helical scanning.
P/NO : 3834RP0105S