Owner's Manual

Preparation
7
ote
If the audio format of the
digital output
does not
match the
capabilities
of
your
DVD/CD
Receiver,
the
receiver will
produce
a
strong,
distorted sound or no
sound at all.
The DivX files in
your memory
card will not be able
to be
play.
Connections
(Continued)
Optional Equipment
Connections
1
Connect a VCR to the AV IN connectors.
2
Connect an
optical output
of DVD
Player (or Digital
Device
etc)
to the OPTICAL IN connector.
3
Connect the USB
port
of a USB
Memory (or
MP3
player, etc.)
to the USB HOST on the front of the
unit.
AUDIO
L
R
VIDEO
OUT IN
AUDIO
(L)
AUDIO
(R)
Rear of VCR
To AV IN AUDIO
(L/R)/
VIDEO
Front of DVD/CD Receiver
To AUDIO OUT
(L/R)/
VIDEO OUT
DVD
Player (or Digital
Device, etc)
OPTICAL
OUT
USB
Memory,
MP3
Player (or
Memory
Card
Reader,
etc.)
AUDIO
L
R
FM Wire aerial
(supplied)
AM
Loop
aerial
(supplied)
Aerial Connections
Connect the
supplied
FM/AM aerial for
listening
to the
radio.
Connect the AM
Loop
aerial to the AM aerial connec-
tor.
Connect the FM Wire aerial to the FM aerial connec-
tor.
otes
To
prevent
noise
pickup, keep
the AM
Loop
aerial
away
from the DVD/CD Receiver and other
components.
Be sure to
fully
extend the FM wire aerial.
After
connecting
the FM Wire
aerial,
keep
it as horizontal
as
possible.
About Ferrite Core
(OPTIONAL)
Be sure to attach the ferrite core to the
speaker
cables
(for connecting
to this
unit).
This ferrite core can reduce noises.
How to attach the ferrite core
1 Press the
stopper [a]
of the ferrite core to
open.
2 Wind the cable once on the ferrite core.
3
Close the ferrite core unitl it clicks.
Note:
Attach the ferrite core near the unit
(Refer
to the
fig.3
and
comment.).
The
length
here is
short as much as
possible.